Abstract:A simple, environmentally friendly, cost-effective, and sensitive method was developed for the determination of trace lead in tap water by flow injection (FI) on-line unequal flow complexation preconcentration procedure coupled with flame atomic absorption spectrometry (FAAS). Compared with conventional preconcentration method, the unequal flow complexation preconcentration procedure, increased the flow rate of sample while decreased the flow rate of complexing agent. The new method decreased the dilution effect of sample caused by the chelating agent, increased the sorption preconcentration effect, and increased the enhancement factor. The decrease in the flow rate of chelating agent will not result in a deficient complex formation because the concentration of APDC is much higher than that of the sample's. Compared with other sorption preconcentration methods, such as, multiplexed sorption preconcentration procedure, the unequal flow complexation preconcentration procedure need not to prolong the preconcentration time, but received even better results. Taking lead as a model element, ammonium pyrrolidine dithiocarbamate (APDC) as the chelating agent, and ethanol as the eluent, the proposed FI on-line KR unequal flow complexation preconcentration procedure was coupled with FAAS for the determination of trace lead in tap water. With a sample loading flow rate of 10. 4 mL x min(-1) and preconcentration time of 60 s, the enhancement factor increased from 30 (conventional equal flow complexation preconcentration procedure) to 59 (unequal flow complexation preconcentration procedure), the detection limit (3sigma) of 5.6 microg x g L(-1) was obtained at a sampling frequency of 40 samples x h(-1). The relative standard deviations (n = 11) were found to be 2.1% at the level of 0.5 mg x L(-1). The recovery ranged from 98.5% to 102%. The proposed method has been successfully applied to the determination of lead in tap water samples.

Simultaneous On-Line Preconcentration and Determination of Trace Metals in Environmental Samples by Flow Injection Combined with Inductively Coupled Plasma Mass Spectrometry Using a Nanometer-Sized Alumina Packed Micro-Column

Simultaneous on-line preconcentration and determination of trace metals in environmental samples using a modified nanometer-sized alumina packed micro-column by flow injection combined with ICP-OES

Simultaneous on-line pre-concentration and determination of trace metals in environmental samples by flow injection combined with inductively coupled plasma mass spectrometry using silica gel modified with niobium(V) oxide

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Mesoporous Titanium Dioxide As a Novel Solid-Phase Extraction Material for Flow Injection Micro-Column Preconcentration On-Line Coupled with ICP-OES Determination of Trace Metals in Environmental Samples.

On-line Preconcentration and Determination of Trace Metals in Water Samples by Flow Injection Combined with Flame Atomic Absorption Spectrometry via Calix[4]arene Carboxylic Acid Packed Micro-column

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Nanometer-size Titanium Dioxide Microcolumn On-Line Preconcentration of Trace Metals and Their Determination by Inductively Coupled Plasma Atomic Emission Spectrometry in Water

Calconcarboxylic Acid Dynamically Modified Nanometer-Sized Zirconia for On-Line Flow Injection-Inductively Coupled Plasma Optical Emission Spectrometry Determination of Trace Heavy Metals in Environmental Water Samples

A Flow Injection On-Line Unequal Flow Complexation Preconcentration Procedure Coupled with Flame Atomic Absorption Spectrometry for Determination of Lead in Tap Water

On-line sample-pre-treatment schemes for trace-level determinations of metals by coupling flow injection or sequential injection with ICP-MS

On-line Preconcentration and Separation of Co, Ni and Cd Via Capillary Microextraction on Ordered Mesoporous Alumina Coating and Determination by Inductively Plasma Mass Spectrometry (ICP-MS).

Air mixing sorption flow injection preconcentration in a knotted reactor coupled with flame atomic absorption spectrometry for determination of trace lead in water

Flow injection on-line preconcentration-graphite furnace atomic absorption spectrometry for the determination of cadmium, copper and nickel

THE DETERMINATION OF TRACE AMOUNTS OF HEAVY-METALS IN WATERS BY A FLOW-INJECTION SYSTEM INCLUDING ION-EXCHANGE PRECONCENTRATION AND FLAME ATOMIC-ABSORPTION SPECTROMETRIC DETECTION

Simultaneous determination of trace amounts of nickel, copper and mercury by liquid chromatography coupled with flow-injection on-line derivatization and preconcentration

Flow Injection Semi-online Preconcentration Graphite Furnace Atomic Absorption Spectrometry for Determination of Cadmium,Copper and Manganese

Hyphenation of C18 Gel Silica Column and Flow Injection withInductively Coupled Plasma-Mass Spectrometry andIts Application on the Seawater Analysis

Online Flow-Injection Cobalt-Ammonium Pyrrolidin-1-Yldithioformate Coprecipitation for Preconcentration of Trace Amounts of Metals in Waters with Simultaneous Determination by Inductively-Coupled Plasma-Atomic Emission-Spectrometry

On-Line Separation and Preconcentration of Trace Metals in Biological Samples Using a Microcolumn Loaded with PAN-Modified Nanometer-Sized Titanium Dioxide, and Their Determination by ICP-AES

An Efficient Flow-Injection System with On-Line Ion-Exchange Preconcentration for the Determination of Trace Amounts of Heavy Metals by Atomic Absorption Spectrometry