Abstract:3D system-in-package has recently been considered a major enabler for high density and heterogeneous microsystem integration. We hereby proposed the concept of a unified micromachining and packaging platform based on LTCC (low temperature cofired ceramic) material system and process, which is implemented by first enhancing an existing LTCC hybrid IC fabrication line and then integrating different LTCC micromachining process modules one by one. Hence, the unified process flow can be accomplished within just one single package-test house. The platform has been capable of micromachining basic 3D MEMS (micro electromechanical system) microstructures into LTCC laminates and using them as a packaging substrate for mounting IC/MEMS from other process platforms, realizing self-contained and versatile microsystems of high density. The 3D microstructures formation process consisting of green tape machining, lamination and cofiring are demonstrated. The designing, analysis and fabricated samples of various micro functional structure enabled by the platform are illustrated, including embedded cooling microchannels (capable of lowering substrate temperature by more than 50K), microaccelerometer for harsh environment, micro Pirani gauge for in-situ vacuum level monitoring and THz (tera hertz) vacuum microelectronic devices. Samples of overall packaged MEMS and IC chips with micromachined LTCC substrate are displayed, showing ultra-low leakage (< 5 x 10(-11) Pa . m(3)/s) vacuum packaging capability and significantly enhanced device performance. In addition, the platform has demonstrated the potential of stacking several laminates with mounted chips into a 3D frame-like microsystem. In comparison, 3D integration purely based on Si micromachining, e. g. anodic-bonding based in-situ wafer encapsulation, may only support a very limited spectrum of devices/materials and integration density and is somehow too expensive for many MEMS researchers.

A New Initiative in Microelectronics Processing at Georgia Tech

CMOS as a research platform

Recent Advances in Monolithic Integration of Diverse Technologies with Si CMOS

Research Progress in Ge-based Advanced Field Effect Transistor Technology

Simulation of Georgia Tech'S Cmos Baseline Using T-Suprem4 and Medici

Ge CMOS Technology with Advanced Interface and Junction Engineering.

Study on Compatible CMOS-MEMS Process with Surface Micromachining for the Application of Monolithic Integration

Design and fabrication of MEMS devices using the integration of MUMPs, trench-refilled molding, DRIE and bulk silicon etching processes

From Classrooms to the Real Engineering World: the Training Program in the Microelectronics Research Center at Georgia Tech.

Device and Integration Technologies of III-V/Ge Channel CMOS

CMOS Platform for Atomic-Scale Device Fabrication

Post-CMOS Process for High-Aspect-ratio Monolithically Integrated Single Crystal Silicon Microstructures

Integrated Microsystem Technology

Investigation Of A Unified Ltcc-Based Micromachining And Packaging Platform For High Density/Multifunctional Microsystem Integration

Investigation and Modeling of Etching Through Silicon Carbide Vias (TSiCV) for SiC Interposer and Deep SiC Etching for Harsh Environment MEMS by DoE

Inter-CMOS process for monolithic integrated MEMS resonator

MEMS monolithic integration technology

A CMOS Compatible Process for Monolithic Integration of High-Aspect-ratio Bulk Silicon Microstructures

Post-CMOS processing challenges and design developments of CMOS-MEMS microheaters for local CNT synthesis

CMOS MEMS: A Key Technology Towards the &#x201c;more Than Moore&#x201D; Era