Abstract:Carbon-fiber reinforced composites are made up of three different phases. Tensile or compressive deformation in the longitudinal (fiber) orientation is controlled by the fibers, leading to a linear stress strain response which ends abruptly when the fibers fail by tensile fracture or kinking in compression. Conversely, major non-linear deformations can develop under transverse compression or in-plane shear because deformation is controlled by the polymeric matrix and the interphase.In this paper, first the V-notched rail shear test was used to research the mechanical properties of composite under in-plane shear loading, and the fracture surfaces of failed specimens were examined using scanning electron microscopy (SEM). The broken samples showed a large residual shear displacement. For [0/90](8s) cross-ply laminate V-notched beam test, the failure mode is the interactions of intralaminar and interlaminar failure. The intralaminar interfacial debonding, matrix cracking and interlaminar degradation occurs in succession. Then a representative volume element (RVE) of fiber random distribution was established, with two dominant damage mechanisms-matrix plastic deformation and interfacial debonding included in the simulation by the extended Drucker-Prager model and cohesive zone model respectively. The simulation results clearly reveal the damage process of the composites and the interactions of different damage mechanisms. It can be concluded that the in-plane shear fracture initiates as interfacial debonding and evolves as a result of interactions between interfacial debonding and matrix plastic deformation. The progressive damage process and final failure mode of in-plane shear model which are based on constitute are very consistent with the observed result under SEM of V-notched rail shear test. Also a transverse shear model was established as contrast in order to comprehensively understand the mechanical properties of composite materials under shear loading, and the progressive damage process and final failure mode of composite under transverse shear loading were researched.

In Situ Crack Growth Observation and Fracture Behavior of Short Carbon Fiber Reinforced Geopolymer Matrix Composites

Effects of fiber length on mechanical properties and fracture behavior of short carbon fiber reinforced geopolymer matrix composites

Strengthening/toughening Mechanisms and Flexural Behavior of Short Carbon Fiber Reinforced Geopolymer Matrix Composites

SiC Fiber Reinforced Geopolymer Composites, Part 1: Short SiC Fiber

Characterization of the flexural behavior of a reactive graphitic nanofibers reinforced epoxy using a non-linear damage model

Effects of Fibre Content on Mechanical Properties and Fracture Behaviour of Short Carbon Fibre Reinforced Geopolymer Matrix Composites

In-situ study of the fracture behavior of SiCf/SiC composite material under three-point bending

Crack Growth Resistance of Hybrid Fiber-Reinforced Cement Matrix Composites

Mechanical Properties And Fracture Behavior Of Electroless Ni-Plated Short Carbon Fiber Reinforced Geopolymer Matrix Composites

Surface Cracking and Fractal Characteristics of Bending Fractured Polypropylene Fiber-Reinforced Geopolymer Mortar

Dynamic evolution of crack fractal of polypropylene fiber reinforced geopolymer during flexural process

Research on in Situ Observation of Fracture Process of Fiber/Epoxy Composites

Microscopic Progressive Damage And Failure Analysis Of Carbon-Fiber Reinforced Composite Under Shear Loading

MECHANICAL PROPERTIES AND FRACTURE BEHAVIOR OF ELECTROLESS <font>NI</font>-PLATED SHORT CARBON FIBER REINFORCED GEOPOLYMER MATRIX COMPOSITES

In-situ characterization on the fracture behavior of three dimensional polymer nanocomposites reinforced by CNT sponge

In Situ Observation of Fracture Interface Between an Individual Fiber and the Pyrocarbon Matrix in C/C Composites

Short Carbon Fiber (Csf)-Reinforced Geopolymer Matrix Composites

SiC fiber reinforced geopolymer composites, part 2: Continuous SiC fiber

In Situ Strain and Damage Monitoring of GFRP Laminates Incorporating Carbon Nanofibers under Tension

Exploring the influence of specimen types on the intralaminar fracture behavior of fiber-reinforced polymer matrix composites

Study on Fracture of Fiber-Reinforced Polymeric Composites Using Spiral Notch Torsion Test