Abstract:In high temperature conditions, this can cause considerable changes in the mechanical properties of the composite. In order to determine the structural and mechanical property changes that occur in composite materials at elevated temperatures, to elucidate the damage mechanisms at elevated temperatures, and to improve the stability and durability of the materials. This paper studies how plasma treatment time affects the surface polarity, roughness, wettability and mechanical properties of carbon fibers. The results showed that the best wettability was attained after 10 min of plasma treatment, and new oxygen-containing functional groups (COO- and -C=O) developed on the fiber surface. The fundamental explanation is that during plasma surface treatment, the CH group in the bisphenol A part chain segment present in the epoxy resin sizing agent's composition is oxidized, forming an organic oxide layer. In this paper, the plasma modification technology was utilized to improve the interfacial compatibility of carbon fiber and Polyimide (PI) resin, and the interlaminar shear strength reached 103.98 MPa, up 10.49 %, and the strength retention rate was 84.3 % at 300 °C. In this paper, the plasma modification technique was employed to increase the interfacial compatibility of carbon fiber and PI resin. It was found that the Inductively Coupled Plasma (ICP) treated carbon fiber surfaces underwent physical and chemical changes that effectively enhanced the interfacial compatibility with the resin. However, the chemical groups and physically etched regions on the surface of the plasma-modified fibers are able to impede the relative motion of the resin to a certain extent, thus improving the interfacial strength.

Effects of Argon Plasma Treating on Surface Morphology and Gas Ionization Property of Carbon Nanotubes

Effects Of Corona Discharge On The Surface Structure, Morphology And Properties Of Multi-Walled Carbon Nanotubes

Effect of Hydrogen Plasma Treatment on Uniformity of Field Emission from Carbon Nanotube Film

Plasma Composition During Plasma-Enhanced Chemical Vapor Deposition of Carbon Nanotubes

Effects of Plasma and Acid Treatment on the Dispersion of Carbon Nanotubes in Liquids

A comparison between ion irradiation assisted- and electron irradiation assisted-oxygen plasma treatment on modification of nanostructured carbon films

Plasma etching carbon nanotube arrays and the field emission properties

Characterization of Plasma-Enhanced Chemical Vapor Deposition Carbon Nanotubes by Auger Electron Spectroscopy

Effects of gas pressure and plasma power on the growth of carbon nanostructures

One-step amination of MWCNTs in RF-dielectric barrier discharge Ar–N2-H2 plasmas

Optical Plasma Control During ARC Carbon Nanotube Growth

Enhanced Ferromagnetic Properties of N2 Plasma-Treated Carbon Nanotubes

Effects of argon plasma treatment on carbon fiber surface characteric and its reinforcing polyimide composites interfacial properties at room and elevated temperatures

Effects of Argon Plasma Pretreatment on Polar and Nonpolar Gan/Al2o3 Interface

Erosion effects of atomic oxygen on carbon nanotube arrays in different incidence direction

Effect of Surface Treatment on Printed Carbon Nanotube Field Emitters

Influence of plasma condition on carbon nanotube growth by rf-PECVD

Plasma etching treatment for improving the field emission properties of carbon nanotubes composite emitters

Optical emission spectroscopy study of the influence of nitrogen on carbon nanotube growth

Study on effect of hydrogen treatment on amorphous carbon film using scanning probe microscopy

Electron Spin Resonance Study on Acid Treatment of Carbon Nanotube