Abstract:Aluminum alloys are extensively used in many fields such as aeronautics, astronautics, vehicle manufactures and living products clue to their good mechanical properties and anti-corrosion performance. Traditionally, the most effective corrosion protection technologies are based on the use of Cr6+ containing formulations to extend the applications of aluminum alloys in high corrosive media such as chlorides containing solutions. However, the recent recognition that chromates are highly toxic and carcinogenic has led to extensive research to develop new alternatives. Many works have been published using different conditions to obtain rare earth (RE) conversion layers on several aluminum substrates. Unfortunately, these reported anti-corrosion technologies based on RE modified films presented several drawbacks including long formation time, high formation temperature and even high potential in some cases. The goal of the present work is to introduce the novel cathode electrophoresis technique to quickly deposit cerium modified film on the surface of Al 5083. The morphology and structure of the RE. film were characterized by SEM, EDS and XRD, the corrosion resistance was investigated by EIS and potentiodynamic polarization curves in 0.1 mol/L NaCl solution. The results showed that uniform CeO2 film of 0.8 mu m thickness can be prepared by cathode electrophoresis process in 0.1 mol/L Ce(NO3)(3) ethanol solution at a voltage of 12 V for 60 s. Polarization curves confirmed its excellent protective property through inhibiting the cathodic reaction. Impedance data collected from EIS in 0.1 mol/L NaCl solution remained capacitive for 31 d, which indicated the lack of localized corrosion. With the increase of exposure time, the charge-transfer resistance R-p became higher, the surface capacitance C-t nearly kept constant and cracks of the film reduced obviously, demonstrating a self-healing property. Apparently local cathodes were covered during the RE modification processes, thereby reducing the driving force for pitting.

Technical Study for Fabrication of New Cermet Used As Inert Anode in Aluminum Molten-Salt Electrolysis

Ultrafast pressureless sintering of high conductivity Ni-based cermets inert anode for Carbon‐free electrolytic aluminum

Advanced Multi-Metallic SOFC Anode Development by Mechanical Alloying Route

Plastic shaping of NiFe2O4‐based cermets using granular feedstock: microstructure and mechanical properties

Electrochemical properties of Ml(NiCoMnCu)5 used as an alkaline fuel cell anode

Molten Aluminum-Induced Corrosion and Wear-Resistance Properties of ZrB2-Based Cermets Improved by Sintering-Temperature Manipulation

The Corrosion of 30% Mo-ZrO2 Cermet in Molten Slag of CaO-MgO-Al2O3

Study on Spark Plasma Sintering of NiAl2O4-Metal Inert Anodes

A Novel Method for Preparing Anode Cermets for Solid Oxide Fuel Cells

Preparation of highly active and durable electrodes for alkaline water electrolysis by anodizing of commercial FeNi and FeNiCo alloys

Preparation and SEM of Ni/Ce-YSZ Anode Materials

Microstructure and Mechanical Properties of Ni/10 Mol% Sc2O3–1 Mol% CeO2–ZrO2 Cermet Anode for Solid Oxide Fuel Cells

EIS study of oxidation heat‐treatment effects on corrosion behavior of Ni10Cu11Fe6Al metallic inert anode inside molten calcium chloride salt

Development of Nonconsumable Anode for Rare Earth Molten Salt Electrolysis

Performance Evaluation of Low-Temperature KF-NaF-AlF₃ Electrolytes for Aluminum Electrolysis Using Vertical Inert Cu-Ni-Fe Alloy Anodes

Electrochemical impedance study of corrosion of pure Ni, Fe, Cr, and Fe‐5Cr alloy in molten nitrides

Long-Term Testing of WC–Ni–Fe Coating as an Inert Anode in a Low-Temperature Electrolyte for Aluminum Production

Feasibility Study on Aluminum Under Laser Ablation for Corrosion Resistance in Molten Salt

Characterization and Cathode Electrophoresis Deposition of Cerium Modified Films on Al 5083

Fabrication, Microstructure, Mechanical, and Electrochemical Properties of NiMnFeCu High Entropy Alloy from Elemental Powders

Fabrication and characterization of anodic films onto the FeCrAl stainless steel in ethylene glycol electrolyte