Abstract:Next generation lithium-ion batteries (LIB) with high energy density and high power density have recently become of great interest for electric vehicle and portable devices. With the further upgrade of especially electric vehicles, the next generation LIB with high power and high energy density is urgently required. For this purpose, composite electrode consisting of commercially available graphite active material mixed with silicon nanoparticles is under current development. The main objectives are a significant increase of the practical capacity and energy density of commercial anodes, an overcome of the drawbacks of pure silicon due to large volume changes during electrochemical cycling, and the development of a technology suitable for mass production. In order to reduce the intrinsic mechanical stress of silicon/graphite electrodes and to improve the lithium-ion transport kinetic, free-standing electrode structures were generated by applying ultrafast industrial capable laser material processing. This advanced laser technology is demonstrated to be a flexible and powerful tool for pushing silicon/graphite (Si/C) composite anode materials beyond state of the art electrodes towards application. The electrochemical properties of cells with unstructured and structured electrodes were systematically analyzed by means of cyclic voltammetry, galvanostatic measurements, and electrochemical impedance spectroscopy. The increased active surface enables a significant improvement of lithium-ion diffusion kinetics. Furthermore, it is expected that the increased active surface will also provide additional artificial porosity for active material expansion, which in turn will reduce the mechanical stress within the electrodes during lithiation or delithiation. In this context, in-situ scanning electron microscopy (SEM) was performed in order to analyze the active material volume changes during charging and discharging. A main engineering challenge was to optimize the electrode architecture such as the pitch distance of free-standing structures regarding an enhanced electrochemical performance and a reduced material loss. Furthermore, an alumina (Al2O3) layer with a thickness of 5 nm, which acts as an artificial SEI, was coated on structured silicon/graphite electrodes by applying Atomic Layer Deposition (ALD). Cyclic voltammetry measurements were subsequently performed in order to investigate the fundamental properties of cells with structured and Al2O3- coated silicon/graphite electrodes. Galvanostatic measurements reveal that the cells with structured electrodes exhibit excellent electrochemical properties, i.e., a significantly improved capacity retention. ALD layers can contribute to further improvement of cycle stability and cell lifetime. In addition, advanced full cells with Lithium Nickel Manganese Cobalt Oxide NMC622 as cathode and Si/C as counter electrode were assembled and the electrochemical data will be presented.

Ultrafast pressureless sintering of high conductivity Ni-based cermets inert anode for Carbon‐free electrolytic aluminum

Ultrafast high-temperature sintering to avoid metal loss toward high-performance and scalable cermets

Highly conductive low nickel content nano-composite dense cermets from nano-powders made via a continuous hydrothermal synthesis route

Plastic shaping of NiFe2O4‐based cermets using granular feedstock: microstructure and mechanical properties

Advanced Multi-Metallic SOFC Anode Development by Mechanical Alloying Route

(Invited) Manufacturing and Characterization of Advanced High Energy Silicon/Graphite Electrodes

Achieve a high electrochemical oxidation activity by a self-assembled cermet composite anode with low Ni content for solid oxide fuel cells

Study on Spark Plasma Sintering of NiAl2O4-Metal Inert Anodes

Hierarchical dual-porosity nanoscale nickel cermet electrode with high performance and stability

A Novel Method for Preparing Anode Cermets for Solid Oxide Fuel Cells

Preparation and SEM of Ni/Ce-YSZ Anode Materials

Preparation of Porous NiO-Ce0.8Sm0.2O1.9 Ceramics for Anode-supported Low-temperatureSolid Oxide Fuel Cells

A novel alternating current-assisted sintering method for rapid densification of Al2O3 ceramics with ultrahigh flexural strength

A Hierarchical Porous Microstructure for Improving Long-Term Stability of Ni1-Xcux/Sdc Anode-Supported It-Sofcs Fueled with Dry Methane

Ultrafast synthesis of hard carbon anodes for sodium-ion batteries

Ultrafast Microwave Activating Polarized Electron For Scalable Porous Al Toward High-Energy-Density Batteries

Synthesis and Properties of Ni–SDC Cermets for IT–SOFC Anode by Co-Precipitation

Advanced low-temperature ceramic nanocomposite fuel cells using ultra high ionic conductivity electrolytes synthesized through freeze-dried method and solid-route

Development of high-performance aluminium 6061/SiC nanocomposites by ultrasonic aided rheo-squeeze casting method

Synergistic Bulk and Surface Engineering for Expeditious and Durable Reversible Protonic Ceramic Electrochemical Cells Air Electrode

Molten Aluminum-Induced Corrosion and Wear-Resistance Properties of ZrB2-Based Cermets Improved by Sintering-Temperature Manipulation