Abstract:The mechanical and twinning behavior of Mg alloys containing a monolithic texture component have been extensively studied; however, studies on samples with multi texture components are much insufficient. In this study, the quantitative relationship between the mechanical behavior under tension along the extrusion direction (ED) of Mg AZ31 rods and the percentages of bimodal texture components <0002>// ED (19–87%) and <0002>⊥ED were systematically studied. The component <0002>// ED favors <math>{101¯2}</math> twinning and is soft orientations; however, the component <0002>⊥ED favors prismatic slip and is hard orientations. The results show that the yield strength does not decrease linearly with an increase in the percentage of the soft orientations and show a deviation from the calculations using the conventional rule of mixtures. A higher percentage of the soft grains increases this deviation when the percentage is below 50%, and decreases it over 50%. The ultimate strengths, however, do not show an obvious dependence on the percentage of the soft orientations. Subsequently, the corresponding mechanisms are discussed and a modified rule of mixtures was developed. Bimodal texture components stimulate the activation of <math>{101¯2}</math> twin variants with a low Schmid factor and the presence of more variants within one grain. Conventional strain accommodation rule was used to analyze this twinning behavior, but it cannot explain the experimental observations. Crystal-plasticity based finite element modeling was employed to analyze this strange twinning behavior. The results indicate that the interaction among twin variants, rather than deformation in neighboring grains, plays a major role in the activation of twins with a low Schmid factor, due to a hard deformation propagation from the soft grains to the hard grains. This finding provides an important complementation to the strain accommodation theory.

Effect of Texture Dispersion on the Effective Biaxial Modulus of Cubic Polycrystalline Films

Effect of Texture Dispersion on the Effective Biaxial Modulus of Fiber-Textured Hexagonal, Tetragonal, and Orthorhombic Films

Effective biaxial modulus and strain energy density of ideally (h k l)-fiber-textured cubic polycrystalline films

Effective Biaxial Modulus and Strain Energy Density of Ideally (Hkl)-Fiber-textured Hexagonal, Tetragonal and Orthorhombic Films

2D and 3D cubic monocrystalline and polycrystalline materials: their stability and mechanical properties

Theory of X-ray Reflection Broadening for Textures with Double-Axis Averaging: from Semicrystalline Polymers Exhibiting Twisted Lamellar Growth to Discotic Liquid Crystals

Effect of Steady Shear on Multi-Axial Texture of Symmetric Diblock Copolymers

A quantitative study on mechanical behavior of Mg alloys with bimodal texture components

Effects of Anisotropy and In-Plane Grain Boundary in Cu/Pd Multilayered Films with Cube-on-Cube and Twinned Interface

Elastic Property Estimation in Polycrystalline Films with Crystallographic Texture and Grain Shape

Modeling of Cube-Texture Evolution During Grain Growth in Ni Thick-Films Based on Experimental Observations

Anisotropic Elasticity in A Textured Cubic Film Plane

Texture Evolution and Mechanical Behaviour of Irradiated Face-Centred Cubic Metals.

A quantitative study of the effect of surface texture on plasticity induced surface roughness and dislocation density of crystalline materials

Simulation of Texture Evolution During Plastic Deformation of FCC, BCC and HCP Structured Crystals with Crystal Plasticity Based Finite Element Method

Evaluation of Multiaxial Stress in Textured Cubic Films by X-Ray Diffraction

Polycrystal Simulation of Texture-Induced Grain Coarsening during Severe Plastic Deformation

TEXTURE EVOLUTION OF POLYCRYSTALLINE ALUMINUM DURING ROLLING DEFORMATION I.Experimental Study

Effect of uniaxial loading direction on mechanical responses and texture evolution in cold pilgered Zircaloy-4 tube: Experiments and modeling

Texture of Electroplated Copper Film under Biaxial Stress

Investigation on Residual Stress and Crystallographic Texture of YSZ Films Prepared by EB-PVD