Abstract:A novel positively charged nanofiltration membrane was designed and prepared by a simultaneous crosslinking/quatemization of poly(m-phenylene isophthalamide)/polyethyleneimine (PMIA/PEI) blend precursor membrane. To improve the PEI retention ratio during precursor membrane fabrication, propanetriol glycidyl ether (PTGE) was used as a cross-linker. For nanofiltration preparation, the cross-linking time and p-xylylene dichloride (XDC) concentration were optimized. A comprehensive characterization of the nanofiltration membrane was conducted in terms of chemical composition, surface morphology, surface charge, pore structures and separation properties. Results indicated that the density of the positive charge increased after the simultaneous cross-linking/quaternization. The nanofiltration membrane with pore size in the range of 0.5-2 nm exhibited high MgCl2 rejection of 94.4% and water permeability of 37.3 L M-2 h(-1) at 0.4 MPa. Furthermore, to make a comparison between the PMIA/PEI nanofiltration membrane and the other PEI based nanofiltration membranes in the previous studies, an empirical upper bound correlation between water permeability and water/salt selectivity was established. Due to the high density of positive charge on the membrane, the mono-/divalent ion (Na+/Mg2+) selectivity of this novel nanofiltration membrane was at a high level compared with recent reports and much higher than commercial nanofiltration membranes. This work provides an effective method for fabricating the highly positively charged nanofiltration membrane which has great potential for multivalent cations separation.

Synthesis and Characterizations of New Negatively Charged Organic–inorganic Hybrid Materials

Preparation of novel positively charged copolymer membranes for nanofiltration

A new inorganic–organic negatively charged membrane: membrane preparation and characterizations

Fundamental studies of a new hybrid (inorganic–organic) positively charged membrane: membrane preparation and characterizations

Synthesis and Characterizations of New Negatively Charged Organic–inorganic Hybrid Materials: Effect of Molecular Weight of Sol–gel Precursor

Synthesis and characterizations of novel, positively charged hybrid membranes from poly(2,6-dimethyl-1,4-phenylene oxide)

A Novel Positively Charged Nanofiltration Membrane Formed Via Simultaneous Cross-Linking/quaternization of Poly(m-Phenylene Isophthalamide)/polyethyleneimine Blend Membrane

Fundamental studies of novel inorganic-organic charged zwitterionic hybrids: 2. Preparation and characterizations of hybrid charged zwitterionic membranes

Preparation and Characterization of Novel Negatively Charged Hybrid Membranes

Fundamental Studies of a New Hybrid (inorganic–organic) Positively Charged Membrane. II. Membrane Preparation Via Alcoholysis Reaction and Amination Processes of Silicone and Titanate Coupling Agents

Fundamental Studies of Novel Inorganic–organic Charged Zwitterionic Hybrids

Preparation of Organic–inorganic Hybrid Cation-Exchange Membranes Via Blending Method and Their Electrochemical Characterization

Fundamental Studies of Novel Inorganic–organic Charged Zwitterionic Hybrids3. New Hybrid Charged Mosaic Membranes Prepared by Modified Metal Alkoxide and Zwitterionic Process

Novel anion-exchange organic-inorganic hybrid membranes prepared through sol-gel reaction and UV/thermal curing

Novel Anion-Exchange Organic–inorganic Hybrid Membranes Prepared Through Sol–gel Reaction of Multi-Alkoxy Precursors

New anion exchanger organic-inorganic hybrid materials and membranes from a copolymer of glycidylmethacrylate and γ-methacryloxypropyl trimethoxy silane

Effect of SiO2 nanoparticle addition on the characteristics of a new organic–inorganic hybrid membrane

New Anion Exchanger Organic-Inorganic Hybrid Materials And Membranes From A Copolymer Of Glycidylmethacrylate And Gamma-Methacryloxypropyl Trimethoxy Silane

Organic–inorganic crosslinked and hybrid membranes derived from sulfonated poly(arylene ether sulfone)/silica via sol–gel process

A new method to prepare organic–inorganic hybrid membranes

Inorganic-organic hybrid membranes with anhydrous proton conduction prepared from tetraethoxysilane, 3-glycidyloxypropyltrimethoxysilane, trimethyl phosphate and diethylethylammonium trifluoromethanesulfonate