Abstract:Field test results show that about 15% to 40% of building heat loss in China is attributable to poor heating systems regulation. The current method for addressing this problem is to install thermostatic radiator valves (TRVs) to the ends of radiators, a method adapted from northern Europe. However, this method has resulted in poor performance from delayed controlling action due to thermal inertia as well as insufficient system control accuracy. This is further compounded by incorrect operation by system users and a lack of financial incentives to regulate the system if users are not billed for their heat consumption. We present a new method for simultaneously heat controlling and metering. The core challenge is to design a control strategy that will maintain the room’s temperature. Thus, we established dynamic heat transfer models for water flow, the radiator and the building so as to obtain the optimal heating strategy. We also simulated the indoor thermal dynamic performance of the heating system with different heating loads, supply water temperatures, and supply water flow rates using three methods: a continuously changing flow rate (Method 1), a step-change flow rate based on temperature deviation (Method 2) and an intelligent step-change flow rate (Method 3) which predicts the duty cycle of the valve in the proceeding period and controls the valve’s on-time. The simulation results indicate the performance of these three methods. For Method 1, as the room temperature is above the set point, the flow rate can be automatically reduced to a level which is proportional to the room temperature deviation. Further, the scale factor of the flow rate is designed according to the +2°C deviation, so it is accepted that the room temperature is higher than the set point by +2°C using this method. However, this low control precision is unsatisfactory. The mean temperature is higher than the set point and greatly affected by the heating load and supply water’s temperature and flow rate. For Method 2, the controlling action is delayed by thermal inertia, the room temperature fluctuates between the highest and lowest levels, and the temperature deviation can be greater than the set value. For Method 3, both the simulation and field test results showed that room temperature deviation was maintained within a ±0.5°C range under the various conditions. This method appears relatively robust and adaptable, and was the best control strategy of the three methods.

Study on Influence Elements of Thermal Misadjustment of Space-heating System

Effect of Inhabitant Behavioral Responses on Adaptive Thermal Comfort under Hot Summer and Cold Winter Climate in China

Air-source Heat Pump Heating System with a New Temperature and Hydraulic-Balance Control Strategy: A Field Experiment in a Teaching Building

Performance Investigation of Convective and Radiant Heat Removal Methods in Large Spaces

SIMULATION ON INDOOR THERMAL DYNAMIC PERFORMANCE OF HEATING SYSTEM UNDER THE ON-OFF VALVE ADJUSTING MODEL

Analysis on Control Mechanism and Response Characteristics of Residential Thermostats in District Heating Systems

Research on the Relationship between Thermal Insulation Thickness and Summer Overheating Risk: A Case Study in Severe Cold and Cold Regions of China

Analysis on temperature differences and performance improvement of central air conditioning systems

Analysis on problems existed in simulation of indoor thermal environment for residential buildings

The design of a comfortable thermal environment by simulation: A case study

A novel on-off TRV adjustment model and simulation of its thermal dynamic performance

Application test of the on-off valve regulation and heat allocation technique based on building heat metering

Non-uniform indoor thermal environment and analysis of ideal cooling and dehumidifying efficiency

Experimental study on heat discharging rate adjustment performance of high-temperature phase change thermal storage electric heaters

A Superposition Method to Predict Indoor Temperature Distribution with Convective Heat Gain/Loss Through the Building Envelope

Simulation and Analysis of Building Dynamic Performance in Heat Metering Systems

Indoor thermal nonuniformity of atrium-centered public building: Monitoring and diagnosis for energy saving

Impact analysis of indoor heat gain spatial diverse characteristics on air conditioning system design and capacity in office building

Exploring Building Component Thermal Storage Performance for Optimizing Indoor Thermal Environment – A Case Study in Beijing

Numerical simulation of the influencing factors of radiant floor heating system

Simulation and Analysis on Intermission Heating of Office Buildings in Beijing