Abstract:The conventional method (CM) for shear lag analysis of thin-walled box girders supposes that the neutral axis coincides with the centroidal axis of the whole cross section, and thus neglects the axial equilibrium condition. An analytical method considering axial equilibrium and shear deformation, which is referred to as PM, is proposed for overcoming the defect of the conventional method. The longitudinal displacement of the web is introduced to satisfy the axial equilibrium condition and locate the neutral axis automatically. The shear deformation is considered according to the Timoshenko beam theory. Three independent shear lag functions are adopted for describing different shear lag intensities of the top, bottom and cantilever slabs. The governing differential equations for the displacement variables are deduced by means of the virtual work theorem and solved with the relevant boundary conditions. The analytical solution is then derived for the distance from the neutral axis to the top fiber of the cross section. The accuracy of the proposed method is validated by comparisons with the available experimental data as well as the finite element analysis results. Moreover, the distances from the neutral axis to the top fiber, axial forces, and stress difference ratios are analyzed for typical thin-walled box girders to quantify the influence of the axial equilibrium condition. Finally, an extensive parametric study is conducted to examine the effects of various geometric parameters on the stress difference ratio under different load types. The results show that the proposed method can provide good predictions for both deflections and axial stresses, and neglecting axial equilibrium leads to considerable underestimations of axial stresses especially at the top flange-web junctions over the interior support of the continuous box girder.

Effect of Secondary Warping on Location of Shear Center

ANALYSIS OF SECONDARY TORSION OF BIAXIAL FLEXURAL REINFORCED CONCRETE BEAMS

WARPING TRANSFER THROUGH JOINTS OF RHS COLUMN AND I-BEAM

Shear resistance of slender webs in I-girders

Warping and Bimoment Transmission Through Diagonally Stiffened Beam-to-column Joints

FREE AND WARPING TORSION RIGIDITIES OF HOT-ROLLED SECTIONS WITH TAPERED FLANGE THICKNESS

Effect of Shear Deformation in Latticed Columns on Buckling of Heavily Loaded Industrial Portal Frames

ELASTIC SHEAR BUCKLING OF WEB PLATES IN TAPERED I-GIRDERS

IN-PLANE NONLINEAR ANALYSIS AND BUCKLING OF SHEAR-DEFORMABLE CIRCULAR ARCHES

ELASTIC STABILITY OF STEEL PLATE SHEAR WALL WITH CROSS STIFFENERS IN SHEAR

An Approach to Multi-parameter Warping Displacement Function for Static Analysis of Curved Trapezoidal Thin-walled Box Girders

Improved method for shear lag analysis of thin-walled box girders considering axial equilibrium and shear deformation

Shear Resistance of Stiffened Steel Corrugated Shear Walls

An Approach of Multi-parameter Warping Displacement Function for Natural Frequency Analysis of Thin-walled Box Girders

Analysis of Geometrically Exact Beams with Torsion-Warping Deformation by Weak Form Quadrature Elements

Analysis of Influential Factors on Additional Shear Force Induced by Shear Deformation in Girder Bridges with Corrugated Steel Webs

Effect of warping shape on buckling of circular and rectangular columns under axial compression

A two-parameter warping displacement function approach for static analysis of curved rectangle thin-wall box girders

ENERGY-VARIATIONAL METHOD FOR THE ANALYSIS OF SHEAR LAG EFFECT OF THIN-WALLED CURVED I-BEAMS WITH WIDE FLANGE

The Warping Torsional Deformation Analysis of Spot-Welded Double-Hat Box-Section Thin-Walled Beam under the Change of Spot-Welds Pitch

Transverse shear warping functions for anisotropic multilayered plates