Abstract:In order to improve the welding quality of rotating arc sensing robot, it is of great significance to study the automatic detection of wire feeding speed and its influence on the quality of rotating arc welding. According to the characteristics of the noise in the wire feeding speed signal, firstly, the signal processing method based on the characteristic of periodic change is used to eliminate the noise caused by signal loss. Secondly, a method to eliminate gross error is designed to eliminate communication noise and measurement error signal. Then, the detection method of wire feeding speed based on signal reliability can improve the detection accuracy of wire feeding speed. The detection experiments of wire feeding speed with different welding parameters were carried out, and the detection accuracy of wire feeding speed can be greater than 97% by using the designed algorithm. Moreover, the influence of system error on wire feeding speed detection can be reduced based on the method of introducing correction value. The influence of wire feeding speed on the rotating arc welding quality was tested, and the results showed that, in a certain range, the faster the wire feeding speed was, the more easily the droplet could be thrown into the molten pool. Furthermore, the experimental results showed that the wire feeding speed was also related to arc heat, arc light intensity, the fluidity of molten pool, the smoothness of weld bead, droplet growth rate, and the weld bead size. Therefore, the research content of this paper lays a foundation for the welding robot to predict and control the welding quality according to the detected wire feeding speed.

Study on the underwater welding current signals characteristic based on rotating arc sensor

Automatic underwater arc welding seam-tracking system based on flux-core wire and rotating arc sensor

A Study on the Arc Characteristics of Underwater Wet Welding Process

Design and Numerical Simulation on Local Dry Welding Rotating Arc Sensor

A Survey of Underwater Wet Weld Seam Tracking Based on Ultrasonic Sensor

Analysis of Underwater Wet Welding Seam Forming Based on Arc Sensor Information

New method of signal processing for weld tracking system of submerged arc welding

Modeling Of Underwater Wet Welding Process Based On Visual And Arc Sensor

Underwater Wet Weld Seam Tracking Based on Passive Visual Sensor

Study Of Signal Filtering Base On Rotating Arc Sensor

Modeling and Analysis of Underwater Wet Weld Process Based on Regression Method

Effect of Parameters Change on the Weld Appearance in Stainless Steel Underwater Wet Welding with Flux-Cored Wire

Control weld geometric parameters when wet underwater welding

Active Visual Sensor Based Weld Seam Tracking for Underwater Wet Welding

Arc Stability Indexes Evaluation of Ultrasonic Wave-Assisted Underwater FCAW Using Electrical Signal Analysis

Development of Rotating Arc Sensor

Research on the Online Detection Method of Fillet Welding Arc Stability Based on the Adaptive Model of Rotating Arc Stability Sensor

Detection of Wire Feeding Speed and Its Influence on Rotating Arc Welding Quality

Characterization of the underwater welding arc bubble through a visual sensing method

STUDY ON INTELLIGANT OF THE TEACHING WELDING ROBOT BASED ON THE ROTATING ARC SENSOR

Correlation between wire feed speed and external mechanical constraint for enhanced process stability in underwater wet flux-cored arc welding