Detection of Wire Feeding Speed and Its Influence on Rotating Arc Welding Quality
Jian Le,Yichun Liu,Yinshui He,Hua Zhang,Xiaoqi Chen
DOI: https://doi.org/10.1007/s00170-023-11061-5
IF: 3.563
2023-01-01
The International Journal of Advanced Manufacturing Technology
Abstract:In order to improve the welding quality of rotating arc sensing robot, it is of great significance to study the automatic detection of wire feeding speed and its influence on the quality of rotating arc welding. According to the characteristics of the noise in the wire feeding speed signal, firstly, the signal processing method based on the characteristic of periodic change is used to eliminate the noise caused by signal loss. Secondly, a method to eliminate gross error is designed to eliminate communication noise and measurement error signal. Then, the detection method of wire feeding speed based on signal reliability can improve the detection accuracy of wire feeding speed. The detection experiments of wire feeding speed with different welding parameters were carried out, and the detection accuracy of wire feeding speed can be greater than 97% by using the designed algorithm. Moreover, the influence of system error on wire feeding speed detection can be reduced based on the method of introducing correction value. The influence of wire feeding speed on the rotating arc welding quality was tested, and the results showed that, in a certain range, the faster the wire feeding speed was, the more easily the droplet could be thrown into the molten pool. Furthermore, the experimental results showed that the wire feeding speed was also related to arc heat, arc light intensity, the fluidity of molten pool, the smoothness of weld bead, droplet growth rate, and the weld bead size. Therefore, the research content of this paper lays a foundation for the welding robot to predict and control the welding quality according to the detected wire feeding speed.