Abstract:An arch-shaped beam with different configurations under electrostatic loading experiences either the direct pull-in instability or the snap-through first and then the pull-in instability. When the pull-in instability occurs, the system collides with the electrode and adheres to it, which usually causes the system failure. When the snap-through instability occurs, the system experiences a discontinuous displacement to flip over without colliding with the electrode. The snap-through instability is an ideal actuation mechanism because of the following reasons: (1) after snap-through the system regains the stability and capability of withstanding further loading; (2) the system flips back when the loading is reduced, i.e. the system can be used repetitively; and (3) when approaching snap-through instability the system effective stiffness reduces toward zero, which leads to a fast flipping-over response. To differentiate these two types of instability responses for an arch-shaped beam is vital for the actuator design. For an arch-shaped beam under electrostatic loading, the nonlinear terms of the mid-plane stretching and the electrostatic loading make the analytical solution extremely difficult if not impossible and the related numerical solution is rather complex. Using the one mode expansion approximation and the truncation of the higher-order terms of the Taylor series, we present an analytical solution here. However, the one mode approximation and the truncation error of the Taylor series can cause serious error in the solution. Therefore, an error-compensating mechanism is also proposed. The analytical results are compared with both the experimental data and the numerical multi-mode analysis. The analytical method presented here offers a simple yet efficient solution approach by retaining good accuracy to analyze the instability of an arch-shaped beam under electrostatic loading.

Pull-in voltage analysis for an electrostatically actuated extensional microbeam with large deflection

Analytical model of electrostatic fixed-fixed microbeam for pull-in voltage

RESEARCH ON PULL-IN AND RELEASE PHENOMENON OF ELECTROSTATIC MICROPUMPS

Transient Pull-In Analysis of Micro-Plate with Fluid-Structure Interactions

Electrostatic-Nonlinear Beam Coupling Problem Solved by Galerkin Spectral Method

Multi-physics Analysis of an Electrostatically Actuated Microcantilever in Viscous Fluids

Analyses of Transverse Vibrations of Axially Pretensioned Viscoelastic Nanobeams with Small Size and Surface Effects

Dynamical Characteristics of Fluid-Conveying Microbeams Actuated by Electrostatic Force

Dynamic Characteristics of Electrostatically Actuated Shape Optimized Variable Geometry Microbeam

Dynamic Flexoelectric Actuation and Vibration Control of Beams

Coulomb actuated microbeams: A Chebyshev-Edgeworth approach to highly efficient lumped parameter models

Influence of Micro-Cantilever Geometry and Gap on Pull-in Voltage

Size-dependent nonlinear dynamics of a microbeam based on the modified couple stress theory

Analysis of Impact of Bottom Electrode Position on Dynamic Pull-In Parameters of Microcantilevers

Nonlinear mechanism of pull-in and snap-through in microbeam due to asymmetric bias voltages

ANALYSIS OF NON-LINEAR PIEZOTHERMOELASTIC LAMINATED BEAMS WITH ELECTRIC AND TEMPERATURE EFFECTS

Dynamic Analysis of electrostatically actuated fixed-fixed microbeams with midplane-stretching effects

Pull-in instability and nonlinear vibration of microbeam with piezoelectric patch driven by electrostatic force using modified couple stress theory

Dynamic Characteristics of Electrostatically Actuated Microbeams with Slant Crack

Nonlinear behavior analysis of electrostatically actuated multilayer anisotropic microplates with residual stress

Analytical Method of Predicating the Instabilities of a Micro Arch-Shaped Beam under Electrostatic Loading