Abstract:Flexoelectric material under certain inhomogeneous electric field can be utilized to control the vibration of flexible structure based on the converse flexoelectric effect. The atomic force microscope (AFM) probe placed on the top of flexoelectric patch and the electrode under it with certain voltage applied between them are used to generate the inhomogeneous electric field. The actuation membrane force and bending moment induced by flexoelectric patch in turn influence the vibration of shells. In this study, an elastic cantilever beam excited by an initial static mechanical force locating at the tip end is considered. As the mechanical force withdraws the snapback response appears where the cantilever beam vibrates with all mode participating and their amplitudes decaying exponentially. Multiple actuators, consist of AFM probes and flexoelectric patches, are used here to accelerate the decrease of snapback response. On each probe voltages of multiple frequencies are applied to obtain the control effects on multiple modes. The actuator’s positions minimizing the tip displacement of the beam is selected as the optimal ones. Two way of determining the control voltage, i.e., open loop and close loop, is introduced and the information of positions of the actuators are emphasized in both methods. In case studies, the free damping vibration of the beam without control is evaluated and the first mode dominates the vibration. The open loop method, with constant amplitude of control voltage, doesn’t work well in a relatively long time scale. While the close loop method, with its control voltage related to the tip displacement detected by a sensor, turns out to be more stable and effective. The optimal positions for the actuations of both methods are clustered near the fixed end, where the actuation factor reaches its maximal value. At last, limitation on voltage amplitude is implemented to avoid the stress concentration, under which the control effect does not weaken much. This study serves as an introduction to flexoelectric material & multiple AFM probe based vibration control and a theoretical foundation for further researches.

Dynamic Analysis of electrostatically actuated fixed-fixed microbeams with midplane-stretching effects

Analytical model of electrostatic fixed-fixed microbeam for pull-in voltage

Dynamic Model of Flexible Structures with Twisted-and-Coiled Polymer Actuators

Multi-physics Analysis of an Electrostatically Actuated Microcantilever in Viscous Fluids

Dynamic Characteristics of Electrostatically Actuated Shape Optimized Variable Geometry Microbeam

Dynamic Flexoelectric Actuation and Vibration Control of Beams

Micro-Structronics and Control of Hybrid Electrostrictive/Piezoelectric Thin Shells

Nonlinear Control of Hybrid Electrostrictive/Piezoelectric Polymeric Structures: Theory and Experiment

Coulomb-actuated microbeams revisited: experimental and numerical modal decomposition of the saddle-node bifurcation

Dynamical Characteristics of Fluid-Conveying Microbeams Actuated by Electrostatic Force

ANALYSIS OF NON-LINEAR PIEZOTHERMOELASTIC LAMINATED BEAMS WITH ELECTRIC AND TEMPERATURE EFFECTS

Design and testing of a hybrid polymeric electrostrictive/piezoelectric beam with bang–bang control

Analysis of Actuation Authorities Induced by Photostrictive Actuators on a Curved Beam

Dynamics and Active Control of Largely Deflected Active Structures Using the Finite Element Technique

Multiflexoelectric Actuation and Control of Beams

Structronics and Actuation of Hybrid Electrostrictive/Piezoelectric Thin Shells

Pull-in voltage analysis for an electrostatically actuated extensional microbeam with large deflection

Distributed Structural Dynamics Control of Flexible Manipulators—ii. Distributed Sensor and Active Electromechanical Actuator

Control of Beam’s Snapback Responses Using Multiple Flexoelectric Actuators

Dynamic Characteristics of Electrostatically Actuated Microbeams with Slant Crack

Dynamic Analysis of a Uniform Microbeam Resting on a Nonlinear Foundation Considering Its Curvature Subjected to a Mechanical Impact and Electromagnetic Actuation