Fractal Quantitative Characterization of Disperse Effect of Glass Beads in Filled Polypropylene Composites
Chengbao Wu,Chuansheng Liu,Zhenghua Chen,Jizhao Liang
DOI: https://doi.org/10.3969/j.issn.1001-3539.2016.12.018
2016-01-01
Abstract:The polypropylene (PP) composites filled with glass bead (GB) were prepared by the method of melt blending process,the impact strength and the fracture surface of the PP/GB composites were obtained by the impact test,and the dispersion morphology of the GB in the PP resin were observed by the scanning electron microscope,the disperse fractal dimension (Dd) of the GB in the PP resin was calculated by using the calculating model for the Dd and the image processing software. The results indicate that dispersion morphology of the GB filled in PP is fractal evidently,and the Dd can be used to characterize the dispersion morphol-ogy quantitatively,theDd of GB decreases with the increasing of the volume fraction (φf)firstly,as the φf is 11%,the Dd is the mini-mum,the one of the modified GB in PP resin is 1.474,and the one of the non-modified GB in PP resin is 1.503,then,the Dd of GB increases with the increasing of the φf. Under the same φf,the Dd of the modified GB in the PP resin is smaller than that of the non-modified GB. Much closer to 1.5 the Dd is,more uniform the GB in the PP resin is,and the higher the impact strength of the filled PP composite is,and its toughness is better.