Abstract:A core‐shell structured cationic waterborne polyurethane (WPU) emulsions with high solid content were generated by mixing, neutralizing and emulsifying of prepolymer A without hydrophilic groups and prepolymer B with hydrophilic groups. In this study, core‐shell structured cationic waterborne polyurethane (WPU) dispersions with high solid content were prepared. To this end, prepolymer A was synthesized from polytetramethylene ether glycol (PTMG), isophorone diisocyanate (IPDI), castor oil (CO) and 1,4‐butanediol (BDO) without integration of the hydrophilic groups. Prepolymer B with hydrophilic groups was prepared from PTMG, IPDI, CO, BDO and N‐methyldiethanol amine (MDEA). WPU dispersion with a core‐shell structure could be generated by mixing, neutralizing, and emulsifying of the prepolymer A and the prepolymer B. The results indicated that the generation of WPU dispersions through this technique exhibited a milky appearance while the pH values range from 5.30 to 5.60. The optimal combination of prepolymer A and prepolymer B (at a ratio of 5:5) resulted in a dispersion with the highest solid content (50.4%), lowest viscosity (69 mPa·s), and narrowest particle size distribution. As the proportion of prepolymer A to prepolymer B decreases, the tensile strength of WPU film reduces while the elongation at break and glass transition temperature increases. Moreover, initially the contact angle with water was decreased instead of increase. However, modifications in a ratio of prepolymer A and B was not showed any significant impact on the thermal stability performance of the WPU films.

Synthesis of High Solid Content Aqueous Polyurethane and Study on Properties of Filming

Distribution of Hydrophilic Monomer Units and Its Effect on the Property of the Water Dispersion of Polyurethaneurea Anionomer

Study on Silicone Modified Polyurethane-Acrylate Copolymer Emulstion

Studies on the influence of soft-segment structure on the properties of polyurethane adhesive

Synthesis and Application of Hydroxyethyl Methacrylate Modified Waterborne Polyurethane

Preparation and Properties of High Solid Content and Low Viscosity Waterborne Polyurethane—Acrylate Emulsion with a Reactive Emulsifier

Effects of aminopropyl-terminated polydimethylsiloxane on structure and properties of waterborne polyurethane-acrylate

Preparation, mechanical properties of waterborne polyurethane and crosslinked polyurethane‐acrylate composite

Synthesis and Characteristics of Polyurethane-polyacrylate Composite Emulsion

Synthesis and Properties of Aqueous Polysiloxane-Polyurethane Block Copolymer

Preparation and characterization of high solid content cationic waterborne polyurethane with core‐shell structures

Study on Properties of Waterborne Polyurethane Acrylate Modified Epoxy Acrylate Resin

Study on the Synthesis and Properties of Waterborne Polyurea Modified by Epoxy Resin

A novel strategy for preparation of solvent-free high-solid content water-based polyurethane

Synthesis and properties of polyurethane modified with an aminoethylaminopropyl-substituted polydimethylsiloxane. II. Waterborne polyurethanes

Synthesis and Properties of Polyurethane Modified with Aminoethylaminopropyl Poly(dimethyl Siloxane)

STUDY ON SEGMENTED POLYURETHANE WITH MIXED SOFT SEGMENTS OF POLYCHLOROMETHYL METHYL SILOXANE AND POLYTETRAMETHYLENE OXIDE

THE SYNTHESIS AND CHARACTERIZATION OF POLYURETHANE-ACRYLIC GRAFT EMULSION

Effect of Water Content on the Aggregation and Adhesion Properties of Waterborne Polyurethane

Facile preparation of homogenous waterborne poly(urethane/acrylate) composites and the correlation between microstructure and improved properties

Preparation, Characterization, and Property Analysis of Environmentally Friendly Waterborne Polyurethane-Acrylate