Abstract:In this study, a new type of multi-arch tunnel construction method is proposed. This effort is undertaken due to the many disadvantages of the traditional multi-arch tunnel construction method. Furthermore, this method omits the construction of a middle pilot tunnel, and it has the advantages of safety, high efficiency, and being economical. When using the method of continuous arch tunneling without a middle pilot tunnel, the blasting of the first tunnel and the following tunnel has a greater impact on the surrounding rock damage, as well as on the supporting structure of the same cross-section. Therefore, this study uses LS-DYNA finite element software to construct a three-dimensional numerical model. In addition, the perimeter rock damage law and mechanical response characteristics of the supporting structure in the same cross-section of the first tunnel, as well as the following tunnel after blasting without a middle pilot tunnel, are analyzed. At the same time, the results of the study are based on optimizing the blasting program, and these are then applied to the field. Through the results, it is found that, after blasting a continuous arch tunnel without a medial pilot tunnel, the surrounding rock damage in the arch cross-region of the double-arch tunnel (where the arch top and the arch shoulder are more significant) and the effective stress of the supporting structure exceed the strength design value. In addition, the maximum adequate pressure is distributed in the medial diaphragm wall. With the optimized blasting scheme, the range of the peripheral rock damage is reduced by a maximum of 67%, and the effective stress in the supporting structure is reduced by 25.9–64.8%. The research results are of great significance in terms of improving construction safety, economic efficiency, and project quality, as well as in promoting the research and development of new work methods for double-arch tunnels.

CONTROLLED BLASTING DEMOLITION OF TRUSS ARCH BRIDGE

DEMOLITION OF AN ULTRALONG BRIDGE BY CONTROLLED BLASTING

DESIGN IDEA ABOUT EXTRUSION BLASTING OF MULTI-ARCH BRIDGE

BLASTING DEMOLITION OF REINFORCED CONCRETE BRACE BEAMS NEAR BEIJING-SHANGHAI HIGH-SPEED RAILWAY

DIRECTIONAL BLASTING DEMOLITION OF A 32 METERS HIGH PIER BRIDGE OF THE SUPPER HIGHWAY IN COMPLEX ENVIRONMENT

Controlling blasting technology beneath D-class building at risk

A method for rapid demolition of a crossline arch bridge: a case study

Progress and Time Limit Control of Blasting Demolition Project

BLASTING DEMOLITION OF A 17-STOREY BUILDING IN SHEAR WALL STRUCTURE

Numerical and Field Measurement Investigation on Foundation Pit Excavation Blasting of Anchor in Suspension Bridge

Study on Vibration-Damping Blasting Technique for Early-Age Concrete

Control of City Shallow Buried Tunnel Blasting Hazard to Surface Buildings

Damage Detection and Safety Assessment on Bridge 5tructure after Fire Accident

Blasting Control Technology for Shallow Large Span Tunnel under -Passing Buildings and Monitoring Analysis of Blasting

Damage and reliability analysis of double-arch tunnel without a middle pilot tunnel under blast load

Maintenance strategy and method of concrete arch bridges in life cycle ii: performance degradation analysis and repair reinforcement methods

Cost Control on Blasting Demolition Projects

DIRECTIONAL BLASTING DEMOLITION OF A CEMENT KILN WITH COMPOSITE STRUCTURE

Monitoring and control of steel truss arch bridge jacking construction

BLASTING DEMOLITION OF LARGE DIAMETER HYPERBOLIC REINFORCED CONCRETE COOLING TOWER

A method for controlling the blasting effect of reinforced concrete columns