Abstract:In this research, a directional reduction charging structure was proposed to solve the problems caused by drilling and blasting method such as serious damage to surrounding rocks, working face low contour flatness and serious over-under break of root base c. Drilling and blasting tests, numerical calculations and field applications were designed and performed for the verification of the blasting advantages of charge structure. Test results showed that the peak positive strain along the protection direction of directional protection shaped charge was significantly smaller than that of ordinary charge, where PVC material presented the strongest effect such that the peak positive strain of specimen 1 at measuring point 4 (protection direction) was only 0.27 times that at measuring point 9 (non-protected direction). Numerical simulations indicated shaped jet formation, damage-reduction and charge penetration process and obtained the force law of cement target plate. Experimental results revealed that application of charge in tunnel controlled blasting achieved a clear controlling effect on contour line excavation. Compared with ordinary smooth blasting method, all technical indicators of the developed method were improved such that half hole mark rate was increased by about 33% and the amount of over-under break was decreased by about two times. Research results are of certain significance for the stability of surrounding reserved rocks and formation of roadway in blasting engineering and the developed method was found to be applicable to mining, shaft excavation and other projects.

DIRECTIONAL BLASTING DEMOLITION OF A CEMENT KILN WITH COMPOSITE STRUCTURE

Directional Explosive Demolition of 65 M Brick Chimney in Complex Environment

BLASTING DEMOLITION OF LARGE DIAMETER HYPERBOLIC REINFORCED CONCRETE COOLING TOWER

Study on man-made blast disaster resistance of engineering structures

DEMOLITION OF AN ULTRALONG BRIDGE BY CONTROLLED BLASTING

Explosive Demolition of Anomalous Frame Shear Structure Building in Complicated Surroundings

BLASTING DEMOLITION OF REINFORCED CONCRETE BRACE BEAMS NEAR BEIJING-SHANGHAI HIGH-SPEED RAILWAY

BLASTING DEMOLITION OF A 17-STOREY BUILDING IN SHEAR WALL STRUCTURE

DIRECTIONAL BLASTING DEMOLITION OF A 32 METERS HIGH PIER BRIDGE OF THE SUPPER HIGHWAY IN COMPLEX ENVIRONMENT

Safety Techniques Of Blasting In Chimney Colony

Study on Vibration-Damping Blasting Technique for Early-Age Concrete

DDA NUMERICAL SIMULATION OF DIRECTIONAL BLASTING PARAMETERS AND EFFECT IN DEMOLITION OF REINFORCED CONCRETE CHIMNEY

Research On Simulating And Testing On Blasting Noise Of Many Linear Shaped Charge Cutters

Two-fold Intercross Directional Blasting of Shear-wall Structure

Experimental research and application of drilling and blasting with directional damage-reduction shaped charge

BLASTING DEMOLITION OF A 15-STOREY BUILDING

CONTROLLED BLASTING DEMOLITION OF TRUSS ARCH BRIDGE

Damage Analysis of Concrete Structure under Multidirectional Shaped Charge Blasting Using Model Experiment and Ultrasonic Testing

Controlling blasting technology beneath D-class building at risk

STUDY ON THE DIRECTIONAL FRACTURE CONTROLLED BLASTING WITH SLIT-CHARGE IN ROCK

Directional Fracture Controlled Blasting Technology of Bidirectional Cumulative Energy for Roadway Rock Surrounding