Abstract:This paper presents an experimental study and a model for the oil retention and flow pattern of an R32/PVE 68 mixture in compressor suction lines. The test conditions involved a saturation temperature of 7.5 ℃ and a superheat degree of 12 ℃. The refrigerant mass flux and nominal oil mass fraction(OMF no ) were varied within the ranges of 90-230 kg/（m~2·s） and 0%-5%, respectively. The test samples were two smooth copper pipes with horizontal and vertical flow orientations with an inner diameter of 10.7 mm. A high-speed camera was used to record the flow pattern. The results showed that when the mass flux was from 90 to 120 kg/（m~2·s） and the flow pattern was a stratified wavy flow, the amount of oil retention decreased with an increase in mass flux; in other cases, the amount of oil retention increased with an increase in mass flux. When the oil mass fraction was 1% and the mass flux reached 160 kg/（m~2·s）, the flow pattern changed to a wavy annular flow and gradually developed into an annular flow. The double-circle model based on the flow pattern was used to predict the oil retention in the suction line. The results showed a mean absolute deviation of 9.35%, and 87.83% of the data were within ±20% error. To further verify the applicability of the model, 291 data points were collected from five open literature, achieving a mean absolute deviation of 12.90% and a maximum absolute deviation of 65.77%, which proves that the model can accurately predict the oil retention in the suction line.

Numerical Study on the Characteristic of the Oil Suction Pipe for a Rotary Compressor

Numerical study on oil supply system of a rotary compressor

Numerical Analysis Of Noise Radiation Of Compressor Shell Considering Lubrication Oil

Numerical Simulation of the Flow Ripples Considering Fluid Compressibility in Axial Piston Pump

Investigation on the characteristics of oil supply system for a hermetic variable speed rotary compressor

Numerical analysis of the influence of lubrication oil on noise radiation of compressor shell

Computational Fluid Dynamics Analysis on Oil Pumping System for Rolling Piston Compressors

Analysis of the oil supply system of a high-pressure shell scroll compressor

Experimental Study on the Cavitation Characteristics of an Oil Jet Pump with Multiple Nozzles for the Lubrication System in a Steam Turbine

Numerical Investigation on Flow Pattern of Air-Oil with Different Viscosities Lubrication

Optimizing Pipe Network of Lubrication System for Accurate Oil Distribution

Inlet pipe side slot shape's impact on pump's suction: Modeling and simulation

Numerical Analyses of Hydrodynamic Lubrication and Dynamics of the Rolling Piston and Crankshaft in a Rotary Compressor

Experimental Study on the Influencing Factors of Thermal Performance of an Oil-injected Single Screw Compressor

Numerical Simulation for Flow of Rolling Piston Type of Rotary Compressor

In-situ characterization of the size distribution of lubricant droplets in rotary compressor

Study of Oil-Injected Screw Compressors and Its Application

Analysis on Pressure Characteristics of Pump Turbine Guide Bearing Rotating Sump Based on VOF Model

Study on the Hydrodynamic Performance and Stability Characteristics of Oil-Water Annular Flow Through a 90° Elbow Pipe

Modeling of Lubricant Retention in Suction Lines with R32/PVE Oil Mixture Based on Different Flow Patterns

Performance Analysis and Experiment Study of Oil Pump for Linear Compressor