Abstract:Reversible pump turbine (RPT) is designed for pumping water from a lower reservoir to a higher reservoir by using the surplus energy in the power grids. Furthermore, this water have to go down to generate electrical energy by RPT at peak hours or in case of emergency. RPT have to change the working condition between pump mode and turbine mode [1]. In order to meet the requirement of power grid, RPT usually works at low load off-design working condition. Due to RPT’s special way of operating, it’s hard to guarantee the stability of the units. Few years ago, both in TianHuangping pump storage power station [2] and YiXing pump storage power station [3], the abnormal sound and vibration occurs at the distributor of the RPT which in the pump mode when the guide vane opening is very small. In order to resolve this problem, B Nennemann [4] has conducted a detailed research about the abnormal phenomena which happened in YiXing pump storage power station by using 2-D periodical CFD simulation. Eventually, the author acclaimed that the unexpected bi-stable flow conditions and a self-excited torsion mode flutter vibration of the guide vane caused this problem, moreover, the vibration problem can be eliminated by modifying the shape of the guide vane successfully. Addressing the issue of TianHuangping, H G Fan [5] studied the HT of the guide vane of the RPT during the startup process and shutdown process in turbine mode by 2-D periodical CFD simulation. His work indicated that repeating reversal of fluid occurs when the guide vane at slight opening during the shutdown process in turbine mode. This phenomena finally results in the dramatically increasing of the HT which makes the vibration happens. Our previous work [6] has performed the 3-D CFD simulation of the startup process of the pump turbine of Tian Huangping pump storage power station which in the pump mode by implementing the dynamic meshing technique. The results indicates that the main flow between the guide vanes has experienced a deflection when the guide vane opening is very small, and this deflection leads to the sharply changing of the hydraulic torque on the guide vanes, if the transmission of the distributer cannot adapt this changing immediately, the vibration and abnormal sound will occur in the unit. Based on the previous flow field analysis [6] of the dynamic process. This paper presents a structural characteristic analysis of the guide vanes when the pump turbine works in pump mode at slight opening region. The one-way FSI method was carried out to calculate the structural characteristic of guide vanes during the main flow deflection process. And the vibration characteristic of the guide vanes were analyzed. The result shows that the position of the guide vane has a significant influence on the stress and strain of guide vanes.

Effect of Dynamic Structure Stiffness on Rotor Characteristics of Vertical Pump

Modal Frequency and Stability of Rotor System Supported by Viscoelastic Elastomeric Dampers

Stiffness and dynamical behavior of Jeffcottrotor with cross crack

Effect of Unbalanced Magnetic Pull of Generator Rotor on the Dynamic Characteristics of a Pump—Turbine Rotor System

Analysis of Pressure Pulsation Induced by Rotor-Stator Interaction in Nuclear Reactor Coolant Pump

Dynamic characteristics of the rotor system for large pump-turbine sets

Structural dynamic characteristics analysis of a mixed-flow pump based on fluid–structure coupling

Research of Modal Analysis for Impeller of Reactor Coolant Pump

Structural characteristic analysis of the guide vanes of a pump turbine which working at the slight opening region

Mechanical property analysis of shaft tubular pump rotor with different blade angle based on fluid-structure interaction

Analysis on Modeling Rotor System with Sidling Bearing and Ring Seal by Using FEM

Modal Characteristics Analysis of a Variable-Speed Pump-Turbine Rotor System: a Perspective of Resonance

Rotor Vibration Characteristics Considering Nonlinear Stiffness of Spigot Bolts

Fluid–Structure Coupling Analysis of the Stationary Structures of a Prototype Pump Turbine during Load Rejection

Mechanism of the rotor-stator interaction in a centrifugal pump with guided vanes based on dynamic mode decomposition

Finite Element Analysis of the Rotor System of a Magnetically Suspended Compound Molecule Pump

Hydraulic characteristics and structural stability of the rotor of a molten-salt pump

Transition of amplitude–frequency characteristic in rotor–stator interaction of a pump-turbine with splitter blades

DYNAMIC ANALYSIS OF A HYDRAULIC TURBINE UNIT*

Analysis of interpolar air motion coherence and heat transfer under different asymmetric rotor yoke ventilation duct structures of the pumped storage power machine

The Influence of Hydraulic Characteristics on Structural Performance in a Pump-Turbine under No-Load Conditions