Abstract:As process technologies advance into deep sub-micrometer and nanometer scale, the charged device model (CDM) is now considered an important stress model for defining electrostatic discharge (ESD) reliability of integrated circuits. Thus the turn-on time of the ESD elements used in the protection circuit becomes important. At this time, there is no good method to evaluate the CDM ESD device turn-on speed. Equipment like VF-TLP and CC-TLP are too complicated and not precise for this purpose. A new method to evaluate the ESD device turn-on speed is presented in this paper. Based on this novel approach, some CDM ESD devices are analyzed based on the transmission line pulsing (TLP) tester. The designed devices include diodes, grounded-gate NMOS, SCRpsilas (silicon controlled rectifier), and Modified-Lateral SCRpsilas (MLSCR). The rising time of the pulse is set at 200 psec to accurately simulate real CDM pulses. The time-dependent voltage and current data are extracted and calculated from each pulse in the Time Domain Reflection (TDR) TLP tester. Two new ESD turn-on conditions are proposed and defined based on the transient currents in order to compare the relative speed of different ESD devices. The results show that the normalized turn-on time of different devices with various sizes and finger numbers do not correlate well with that obtained under the normal DC conditions, and the same device shows different turn-on characteristics under different pulses. These results enable devices to be designed for improved CDM ESD protection levels, and the present method can be used for ESD design for future nanometer technologies.

Spice Simulation and Experimental Study of Transmission Lines with TVSs Excited by EMP

Transient Analysis of Transmission Lines Loaded by Active Devices Illuminated by an Electro-Magnetic Pulse in the Indoor Environment

Simulation and Analysis of Electromagnetic Properties at the Secondary Port of Electronic Current Transformers Under Very Fast Transient Overvoltage

Flashover Discharge Model of Transmission Lines in Subsea Observation Network

Multi-physics characterization of through silicon vias (TSV) in the presence of a periodic EMP

Transient Characterization of Power Divider Response Illuminated by a High-Power EMP

Synergistic Effects Simulation of MOSFET by Control Volume Finite Element Method

Transient Response of Transient Voltage Suppressor Device under EMP with Fast Rise Time

Selection of Protection Measure for Very Fast Transient Overvoltage of 500 Kv GIS

Application of a SPICE Model for Multiconductor Transmission Lines in Electromagnetic Topology

Trigger voltage walk-in effect of ESD protection device in HVCMOS

STUDY OF LOSS EFFECT OF TRANSMISSION LINES AND VALIDITY OF A SPICE MODEL IN ELECTROMAGNETIC TOPOLOGY

Investigation of Turn-on Speeds of Electrostatic Discharge Protection Devices Using Transmission-Line Pulsing Technique

Selected topics in transient response of aerial lines to high-altitude electromagnetic pulse

Transient Simulation Model for a Lightning Protection System Using the Approach of a Coupled Transmission Line Network

A Novel Single-ended Transient-based Boundary Protection Based on the Instantaneous Energy of Traveling Waves

Improved Transient Model of Prestrikes Encountered in 10 kV Vacuum Circuit Breakers and its Application to Overvoltage Suppression while Switching on Shunt Reactors

Transient Voltage Suppressor Diode Array Protection Circuits with Reducing Loading Effect under High-Power Microwave Pulse Injection

Spice Models for Radiated and Conducted Susceptibility Analyses of Multiconductor Shielded Cables

On switching transient modeling and analysis of electronic on-load tap-changers based Sen transformer