Abstract:A high Fe content easily produces Fe-rich phases with a harmful morphology, resulting in a huge detrimental effect on the properties and recycling ability of Al-Si alloys. Therefore, finding ways to effectively transform Fe-rich phases to form a beneficial phase or shape is of great significance. Accordingly, Al-Si-based alloys with Fe contents ranging from 0.1 wt.% to 2.0 wt.% were modified by different Mn additions. Moreover, experiments combined with simulations were utilized to comprehensively analyze the mechanism of Mn on the morphology and microstructural evolution of Fe-rich phases from different perspectives. The current findings determine that adding different Fe contents changes the phase-transition reactions in alloys. Without Mn, and by increasing the Fe content from 0.1 wt.% to 2.0 wt.%, the Fe-rich phases gradually convert from a skeleton-shaped α-Al8Fe2Si (<0.25 wt.%) to β-Al9Fe2Si2 with a fibrous (0.5 wt.%), needle-like (1.0 wt.%) and plate-like shape without curvatures (2.0 wt.%). The maximum length and mean aspect ratio increase from 12.01 μm to 655.66 μm and from 1.96 to 84.05, while the mean curvature decreases from 8.66 × 10−2 μm−1 to 8.25 × 10−4 μm−1. The addition of 0.35 wt.% Mn promotes a new Chinese-character and petal-shaped α-Al15(FeMn)3Si2, with an atomic ratio of Fe and Mn of 1:1 when the Fe content is lower than 0.5 wt.%, while it transforms to β-Al15(FeMn)3Si2 with an atomic ratio of 5:1, presenting as a refined plate-like shape with a certain curvature, as the Fe content increases to 2.0 wt.%. Mn alters the phase reactions and increases the threshold of the Fe content required for β-Al15(FeMn)3Si2, limiting the formation and growth of them simultaneously in time and space. The enrichment of Mn atoms and solute diffusion at the growth front of β-Al15(FeMn)3Si2, as well as the strong atomic-binding ability, can deflect the growth direction of β-Al15(FeMn)3Si2 for it to have a certain curvature. Additionally, the enriched Mn atoms easily form α-Al15(FeMn)3Si2 and cause the long β-Al15(FeMn)3Si2 to be broken and refined to further reduce the damages caused to the alloy's performance. Ultimately, the maximum length and mean aspect ratio can be effectively reduced to 46.2% and 42.0%, respectively, while the mean curvature can be noticeably increased by 3.27 times with the addition of Mn.

Characteristics of Morphology and Crystal Structure of Α-Phase in Two Al-Mn-Mg Alloys

Heterogeneous Nucleation of Α-Al Grain on Primary Α-Alfemnsi Intermetallic Investigated Using 3D SEM Ultramicrotomy and HRTEM

Two Quite Different Primary Mn-rich Phases in Al-Si-Cu-Mn Heat-Resistant Alloy and Its Effect to Mechanical Properties

Evolution of Microstructures in Al-Mn-Mg Alloys During Homogenization

Formation of intermetallic phases during solidification in Al-Mg-Mn 5xxx alloys with various Mg levels

Morphology, thermal stability, electronic structure and mechanical properties of α-AlFeMnSi phases with varying Mn/Fe atomic ratios: Experimental studies and DFT calculations

Study of the phase transformation from (Fe, Mn)Al 6 to α-Al 12(Fe, Mn) 3Si in AA3104 aluminum alloy during homogenization

Phase Control and Formation Mechanism of Al–Mn(–Fe) Intermetallic Particles in Mg–Al-based Alloys with FeCl3 Addition or Melt Superheating

Effect of Cu and Mn Content on Solidification Microstructure, T-phase Formation and Mechanical Property of AlCuMn Alloys

The Effect of Mn on the Microstructure of Spray-Deposited Al–20Si–5Fe–3Cu–1Mg Alloy

Effect of Cu and Mn content on solidification microstructure, T-phase formation and mechanical property of Al Cu Mn alloys

Exploring crystal structures, stability and mechanical properties of Fe, Mn-containing intermetallics in Al-Si Alloy by experiments and first-principles calculations

Formation of Al 15 Mn 3 Si 2 Phase During Solidification of a Novel Al-12%Si-4%Cu-1.2%Mn Heat-Resistant Alloy and Its Thermal Stability

3D Fe-Rich Phases Evolution and Its Effects on the Fracture Behavior of Al–7.0Si–1.2Fe Alloys by Mn Neutralization

Crystalline structure and morphology of X phase in Cu-Al-Ni-Mn-Ti alloy

Morphology evolution of β-phase in Al-Mg-Si alloys during aging treatment

Dendrite Morphology Evolution of Al<sub>6</sub>Mn Phase in Suction Casting Al-Mn Alloys

The Multiple Orientation Relationships and Morphology of Β' Phase in Al-Mg-Si-Cu Alloy

Optimizing the Morphology and Solidification Behavior of Fe-Rich Phases in Eutectic Al-Si-Based Alloys with Different Fe Contents by Adding Mn Elements

The formation of three phases containing Fe and Mn in 5182 aluminum alloy

Dendrite Morphology Evolution of Al 6 Mn Phase in Suction Casting Al-Mn Alloys.