Abstract:This study focuses on the use of nano ferrites with the chemical formula Mg0.8Zn0.2SmxFe2−xO4 (x = 0.0, 0.005, 0.01, 0.015, 0.02, and 0.025) prepared through the citrate-gel auto-combustion (CGAC) method. The analysis of nanoparticles with a cubic spinel structure involved the use of X-ray diffraction (XRD) and various imaging techniques, such as scanning electron microscopy (SEM & EDS), transmission electron microscopy (TEM), and UV–visible absorption spectroscopy. The crystallite size ranges from 96.4 to 719.0 nm, and the lattice parameter a (Å) ranges from 8.44 to 8.38, decreasing with the size of the nano ferrites. FTIR spectrometer frequency ranges from 559.5 to 772.0 was confirmed. We analyzed the material’s thermo-electric and electrical properties, finding a Curie temperature range of 423–613 and activation energy values of 0.002–0.001 for both EP and EF. We used a VSM to assess retentivity value, magnetization, coercivity, and hysteresis loops, yielding valuable insights into the material’s properties. The conduction in the present ferrites was majorly due to the grain boundary mechanism, which was confirmed through impedance analysis. Ferrite samples exhibit a high dielectric constant and low dielectric loss, rendering them the optimal option for electromagnetic devices functioning at high frequencies. The study also highlighted the importance of the Mg–Zn–Sm nanoparticle structural DC resistivity and DC conductivity, as well as the VSM room temperature. Spinel ferrite is a versatile material that can be used in magnetic memories, high-frequency, and electronic devices due to its unique properties like DC electrical resistivity and conductivity. In the case of the inverse spinel structure of magnesium iron oxide, the octahedral site is preferred by magnesium cations with a higher probability.

Direct Fabrication of Ferrite Mfe2o4 (M = Zn, Mg)/Fe Composite Thin Films by Soft Solution Processing

Direct Fabrication of Ferrite MFe2O4 (M: Zn, Mg)/Fe Composite Thin Films by Soft Solution Processing.

Ferrite/Metal Composites Fabricated by Soft Solution Processing

Ferroelectricity and Ferromagnetism in Fine-Grained Multiferroic Batio3/(Ni0.5zn0.5)Fe2o4 Composites Prepared by A Novel Hybrid Process

Preparation of the Percolative Nickel-Zinc Ferrite/Barium Titanate Composite Ceramics with Liquid-Solid Hybrid Method

Hydrothermal synthesis of ZnFe2O4 ultrafine particles with high magnetization

Preparation Of Fine-Grained Multiferroic Batio3-(Ni0.5zn0.5) Fe2o4 Ceramic Composites

Formation of Nano-Ag/Bifeo3 Composite Thin Film with Extraordinary High Dielectric and Effective Ferromagnetic Properties

Fe/amorphous-Al 2 SiO 5 composites fabricated by low-temperature solid-phase reaction densification achieve synergistically enhanced structural and soft magnetic properties

Synthesis of novel hard/soft ferrite composites particles with improved magnetic properties and exchange coupling

Magnetoelectric CoFe2O4–Pb(Zr,Ti)O3 Composite Thin Films Derived by a Sol-Gel Process

Magnetic and Mechanical Properties of Fe-based Α-Fe2o3/nano-sized MgO-coated Composites

Research Progress of Film/Bulk Oxide Magnetoelectric Composites

Preparation of superparamagnetic Fe3O4/PMMA nano composites and their magnetorheological characteristics

Chemical synthesis of Mg0.8Zn0.2SmxFe2−xO4 nanoparticles structural characterization, optical studies, electromagnetic properties, and applications

Microstructure and Magnetic Properties of Grain Boundary Insulated Fe/Mn0.5Zn0.5Fe2O4 Soft Magnetic Composites

Synthesis of Highly Uniform and Compact Lithium Zinc Ferrite Ceramics via an Efficient Low Temperature Approach

Magnetoelectric Cofe2o4-Lead Zirconate Titanate Thick Films Prepared By A Polyvinylpyrrolidone-Assisted Sol-Gel Method

Cold Sintering Assisted Processing of Mn-Zn Ferrites

Preparation Of Composites Of Ba2zn2fe12o22 Ferrite And Relaxor Ferroelectric Pmznt

Transparent Magnetic Composites of ZnFe2O4 Nanoparticles in Silica