Abstract:In the failure analysis and safety assessment of dissimilar metal welded joints, the mechanical heterogeneity of local regions is usually ignored and limited sampling locations are selected. The mechanical behavior of the crack tip region is the main variables affecting the environmentally assisted cracking behavior, and it is crucial for understanding the impact of mechanical heterogeneity on the local stress-strain state at the crack tip in welded joints. In this study, the effect of mechanical heterogeneity on the local mechanical behavior at the crack tip and on the stress-strain condition at the crack tip front for different crack sizes was investigated through finite-element simulations based on user-defined material subroutines. The local mechanical behavior of an interface region and crack propagation direction with mechanical heterogeneity and a series of initial crack locations were analyzed. The results show that mechanical heterogeneity has a significant effect on the mechanical condition and growth path of cracks at different sampling locations. The interaction between the mechanical heterogeneity around the crack and the crack depth determines the stress and plastic strain in front of the crack tip, which causes a substantial change in the crack growth path. The interface cracks have high stress and plastic strain; thus, the interface is often the weak position where damage occurs. To guarantee a reliable integrity assessment of cracks in mechanically heterogeneous interface regions, local mechanical properties related to crack locations should be determined and utilized.

Fatigue crack propagation normal to a plasticity mismatched bimaterial interface

PROPAGATION BEHAVIOR OF FAIGUE CRACK NORMAL TO THE INTERFACE OF BIMETALLIC LAMINATES WITH PLASTICITY MISMATCH

Crack Propagation Resistance along Strength Mismatched Bimetallic Interface

CRACK PROPAGATION ALONG THE INTERFACE OF EX-PLOSIVE BONDED 1cr18ni9ti/20g PLATE

Plastic Mismatch Effect on Plasticity Induced Crack Closure: Fatigue Crack Propagation Perpendicularly Across a Plastically Mismatched Interface

Evaluation of Interfacial Crack Growth in Bimaterial Metallic Joints Loaded by Symmetric Three-Point Bending

Fatigue Crack Propagation along Explosive Bonded Al/LY12 Interface

Fatigue crack propagation in explosive bonded LY12/20g double-layer metal laminate: I. Face-crack

Numerical Analysis of Constraint and Strength Mismatch Effects on Local Fracture Resistance of Bimetallic Joints

Effects of the transverse stress on biaxial fatigue crack growth predicted by plasticity-corrected stress intensity factor

Fatigue Crack Propagation in LY12/Cu Double-Layer Metal Laminate(ⅰ)——face-Crack

Research on the Fatigue Crack Growth Behavior of a Zr/Ti/Steel Composite Plate with a Crack Normal to the Interface

Crack Deflection at an Interface Between Dissimilar Piezoelectric Materials

About the Role of Interfaces on the Fatigue Crack Propagation in Laminated Metallic Composites

Fatigue crack propagation characteristics of aluminum/steel laser-metal inert gas fusion-brazed joints in different micro-zones

Fatigue crack growth characterization of composite-to-steel bonded interface using ENF and 4ENF tests

A New Approach to Predicting Fatigue Crack Propagation

An Experimental Investigation of In-Plane Constraint Effect on Local Fracture Resistance of A Dissimilar Metal Welded Joint

Effect of Inhomogeneous Mechanical Properties on the Stress-Strain Field at the Crack Tip and Crack Growth Direction in Dissimilar Metal Welded Joints

Modeling of Fatigue Crack Propagation

Creep-Fatigue Crack Initiation Simulation of a Modified 12% Cr Steel Based on Grain Boundary Cavitation and Plastic Slip Accumulation