Abstract:A series of high molar mass terpolymers is synthesized by ring-opening polymerization of L-lactide (LLA), 1, 3-trimethylene carbonate (TMC) and glycolide (GA). A totally bioresorbable composite is obtained by reinforcing a terpolymer matrix with plasma treated poly (L-lactide-co-glycolide) (PLGA) short fibers. Solution cast films of the various materials are allowed to degrade at 37 C at pH 8.5 Tris buffer using proteinase K, in comparison with a PLLA-TMC copolymer and a PLLA homopolymer. Degradation is monitored by using various analytical techniques such as gravimetry, DSC, GPC, H-1 NMR and SEM. The results show that the enzymatic degradation rate of PLLA-TMC-GA terpolymers with predominant LLA component is affected by both the average LLA block length (I-LLA) and crystallinity. A shorter average LLA block length results in lower crystallinity, which will lead to faster degradation. However, too short average LLA block length (i.e. I-LIA <= 4.0) can retard the degradation process. The composition of the copolymers remains unchanged during degradation. In contrast, the molar mass decreases due to hydrolytic chain cleavage in the bulk. Similarly, thermal property changes are observed with increase of the melting temperature and melting enthalpy in most cases. SEM observation strongly supports a surface erosion mechanism. The composite PLTG95/5/5C exhibits lower mass loss rate as compared to neat PLTG95/5/5 due to the presence of PLGA fibers which are non-degradable by proteinase K. On the other hand, the composite shows much faster molar mass loss rate than PLTG95/5/5 because the rapid hydrolytic degradation of PLGA fibers speeds up the degradation of the matrix by internal autocatalysis. (C) 2014 Elsevier Ltd. All rights reserved.

Thermal Degradation Kinetics of G-Ha/pla Composite

Nonisothermal Crystallization Behavior of Biocomposites from Poly(lactic Acid) and Bamboo Fiber

Mechanical Properties and Degradation Properties in Vitro of Carbon Fiber Reinforced Hydroxyapatite/polylactide Composite

A Kinetic Study of the Thermal Degradation of Nylon-6/Attapulgite Nanocomposites

Hydrolytic And Thermal Degradation Of Polyethylene Glycol Compatibilized Poly(Lactic Acid)-Nanocrystalline Cellulose Bionanocomposites

Mechanical Properties and Degrading Behaviors of Aluminum Hypophosphite-Poly(Lactic Acid) (PLA) Nanocomposites

Isothermal crystallization process and thermal analysis of polylactic acid/cotton fiber composites during thermal degradation

Hydro-Thermal Degradation: A New and Rapid Method for Evaluating the Bio-degradation Performance of Poly(lactic acid)

Differentiation between Hydrolytic and Thermo-Oxidative Degradation of Poly(lactic acid) and Poly(lactic acid)/Starch Composites in Warm and Humid Environments

Thermal decomposition features of micro-nano rice husk/polylactic acid blends for 3D printing

Enzyme-catalyzed Degradation Behavior of L-Lactide/trimethylene Carbonate/glycolide Terpolymers and Their Composites with Poly(l-Lactide-co-glycolide) Fibers

Thermal Decomposition of Bio-Based Plastic Materials

Pyrolysis, kinetics and thermodynamic analyses of rice husks/clay fiber-reinforced polylactic acid composites using thermogravimetric analysis

Carbonization of Poly(methyl Methacrylate) by Incorporating Hydroxyapatite Nanorods During Thermal Degradation

Degradation kinetics of PLA compounds with castor oil

Kinetics of catalyzed thermal degradation of polylactide and its application as sacrificial templates

Degradation of Mechanical Properties of Flax/PLA Composites in Hygrothermal Aging Conditions

Pyrolysis Kinetic Analysis of Molten Bioplastics Based on the Combination of Real-Time Characterization and Guassian Deconvolution: Case Study of Poly(lactic Acid) Materials

Thermal Degradation Kinetics of Ethylene-Vinyl Acetate Copolymer Containing Hydrotalcite and Red Phosphorus

Thermal Degradation and Flame Retardance of Biobased Polylactide Composites Based on Aluminum Hypophosphite

Degradation kinetics and volatile identification in poly(lactic acid), aloe vera, and polyester polyol biocomposites