Abstract:Biowaste to 3D printed biocomposites. The enhancement of the mechanical and thermal characteristics of 3D printed polylactic acid (PLA) composites reinforced by coir fiber powder (CFP) has been investigated by varying the weight percentage (wt%) of the reinforcement and annealing process. CFP/PLA composite filaments with CFP compositions of 0.1, 0.3, and 0.5 wt% were fabricated. These filaments were used to print CFP/PLA test specimens. The specimens were annealed at 90°C for 120 min in a hot air oven followed by cooling at room temperature. Mechanical, morphological, crystalline, and thermal characterizations were conducted on these specimens. The tensile and flexural strength of neat PLA were observed as 49.7 and 82.4 MPa which decreased by 6.4% and 8.13% respectively for printed composite specimens with 0.5 wt% CFP as reinforcement material. On the other hand, the annealed CFP/PLA composite specimen, with 0.1 wt% CFP as a reinforcement material, demonstrated higher tensile and flexural strength. Specifically, it exhibited a maximum tensile strength of 56.4 MPa and a maximum flexural strength of 92.9 MPa, which are 13.5% and 12.7% higher, respectively, than neat PLA. These strengths are 15.5% and 16.7% higher, respectively, than those of the unannealed CFP/PLA composite specimen with the same wt% of CFP reinforcement. The annealing process increased the crystallinity of composites by enhancing the crystallinity index (63%) and crystalline size (6.7 nm). The high thermal stability of composites (with a glass transition temperature of 256°C) makes them suitable for applications in food and medical packaging. Highlights Enhancement of thermo‐mechanical characteristics of 3D printed bio‐composites. Annealing process improved mechanical features of 3D printed bio‐composites. Annealed composite with 0.1 wt% as reinforcement demonstrated better properties. SEM and XRD studies confirmed failure mechanisms and crystalline structure. Thermal and mechanical assets favor its utilization in food wrapping applications.

Thermal decomposition features of micro-nano rice husk/polylactic acid blends for 3D printing

Preparation and characterization of renewable composites from Polylactide and Rice husk for 3D printing applications

Pyrolysis, kinetics and thermodynamic analyses of rice husks/clay fiber-reinforced polylactic acid composites using thermogravimetric analysis

Influence of Rice Husk and Wood Biomass Properties on the Manufacture of Filaments for Fused Deposition Modeling

Investigation of the Hydrolytic Degradation Kinetics of 3D-Printed PLA Structures under a Thermally Accelerated Regime

Mechanical and thermal properties of bamboo fiber reinforced polypropylene/polylactic acid composites for 3D printing

The Mechanical Properties and Degradation Behavior of 3D-Printed Cellulose Nanofiber/Polylactic Acid Composites

Blending and functionalisation modification of 3D printed polylactic acid for fused deposition modeling

Biodegradation and thermal decomposition of poly(lactic acid)-based materials reinforced by hydrophilic fillers

Preparation and properties of heat-treated esterified wood flour/polylactic acid composites for FDM 3D printing

PLA composites reinforced with rice residues or glass fiber—a review of mechanical properties, thermal properties, and biodegradation properties

Feasibility study on thermo‐mechanical performance of 3D printed and annealed coir fiber powder/polylactic acid eco‐friendly biocomposites

Effect of silane coupling agent on the ultraviolet weathering behavior of polylactic acid based composites

Research progress in polylactic acid processing for 3D printing

Thermal and Mechanical Properties of Reprocessed Polylactide/Titanium Dioxide Nanocomposites for Material Extrusion Additive Manufacturing

Numerical Calculation and Properties Study on Polylactic Acid (Pla)/nano-Hydroxyapatite (N-Ha) Composite Fluid 3D Printed by Fused Deposition Modeling

Effect of Thermal and Hydrothermal Accelerated Aging on 3D Printed Polylactic Acid

Effects of hydrophilic fillers on the thermal degradation of poly(lactic acid)

Kinetics of catalyzed thermal degradation of polylactide and its application as sacrificial templates

Thermal Decomposition of Bio-Based Plastic Materials

Development of Composites of PLA Filled with Different Amounts of Rice Husk Fibers for Fused Deposition Modeling