Abstract:Biowaste to 3D printed biocomposites. The enhancement of the mechanical and thermal characteristics of 3D printed polylactic acid (PLA) composites reinforced by coir fiber powder (CFP) has been investigated by varying the weight percentage (wt%) of the reinforcement and annealing process. CFP/PLA composite filaments with CFP compositions of 0.1, 0.3, and 0.5 wt% were fabricated. These filaments were used to print CFP/PLA test specimens. The specimens were annealed at 90°C for 120 min in a hot air oven followed by cooling at room temperature. Mechanical, morphological, crystalline, and thermal characterizations were conducted on these specimens. The tensile and flexural strength of neat PLA were observed as 49.7 and 82.4 MPa which decreased by 6.4% and 8.13% respectively for printed composite specimens with 0.5 wt% CFP as reinforcement material. On the other hand, the annealed CFP/PLA composite specimen, with 0.1 wt% CFP as a reinforcement material, demonstrated higher tensile and flexural strength. Specifically, it exhibited a maximum tensile strength of 56.4 MPa and a maximum flexural strength of 92.9 MPa, which are 13.5% and 12.7% higher, respectively, than neat PLA. These strengths are 15.5% and 16.7% higher, respectively, than those of the unannealed CFP/PLA composite specimen with the same wt% of CFP reinforcement. The annealing process increased the crystallinity of composites by enhancing the crystallinity index (63%) and crystalline size (6.7 nm). The high thermal stability of composites (with a glass transition temperature of 256°C) makes them suitable for applications in food and medical packaging. Highlights Enhancement of thermo‐mechanical characteristics of 3D printed bio‐composites. Annealing process improved mechanical features of 3D printed bio‐composites. Annealed composite with 0.1 wt% as reinforcement demonstrated better properties. SEM and XRD studies confirmed failure mechanisms and crystalline structure. Thermal and mechanical assets favor its utilization in food wrapping applications.

Preparation and characterization of renewable composites from Polylactide and Rice husk for 3D printing applications

Development and Characterization of Rice Husk and Recycled Polypropylene Composite Filaments for 3D Printing

Development of Composites of PLA Filled with Different Amounts of Rice Husk Fibers for Fused Deposition Modeling

Rice Husk with PLA: 3D Filament Making and Additive Manufacturing of Samples for Potential Structural Applications

Mechanical and thermal properties of bamboo fiber reinforced polypropylene/polylactic acid composites for 3D printing

Influence of Rice Husk and Wood Biomass Properties on the Manufacture of Filaments for Fused Deposition Modeling

Valorization of Agro-Wastes as Fillers in PLA-Based Biocomposites for Increasing Sustainability in Fused Deposition Modeling Additive Manufacturing

Composites of Poly(lactic Acid) with Rice Straw Fibers Modified by Poly(butyl Acrylate)

The Use of Agricultural Waste in the Modification of Poly(lactic acid)-Based Composites Intended for 3D Printing Applications. The Use of Toughened Blend Systems to Improve Mechanical Properties

Thermal decomposition features of micro-nano rice husk/polylactic acid blends for 3D printing

Feasibility study on thermo‐mechanical performance of 3D printed and annealed coir fiber powder/polylactic acid eco‐friendly biocomposites

Preparation and characterization of bio-based green renewable composites from poly(lactic acid) reinforced with corn stover

Blending and functionalisation modification of 3D printed polylactic acid for fused deposition modeling

Hemp hurd filled PLA‐PBAT blend biocomposites compatible with additive manufacturing processes: Fabrication, rheology, and material property investigations

Sustainable improvement in the polylactic acid properties of 3D printing filaments: The role of bamboo fiber and epoxidized soybean oil‐branched cardanol ether compatibilizer

Investigating mechanical properties of 3D printed polylactic acid / poly-3-hydroxybutyrate composites. Compressive and fatigue performance

Preparation and characterization of PLA/rice straw fiber composite

Valorization of Waste Wood Flour and Rice Husk in Poly(Lactic Acid)-Based Hybrid Biocomposites

Upcycling of Spent Tea Leaves and Spent Coffee Grounds into Sustainable 3D-Printing Materials: Natural Plasticization and Low-Energy Fabrication

Effects of Rice Straw Powder (RSP) Size and Pretreatment on Properties of FDM 3D-Printed RSP/Poly(lactic acid) Biocomposites

PLA composites reinforced with rice residues or glass fiber—a review of mechanical properties, thermal properties, and biodegradation properties