Microstructure Evolution in CoNiGa Shape Memory Alloys

Jian Liu,Hua Xie,Yanqiu Huo,Hongxing Zheng,Jianguo Li

DOI: https://doi.org/10.1016/j.jallcom.2005.10.056

IF: 6.2

2006-01-01

Journal of Alloys and Compounds

Abstract:Magnetic shape memory CoNiGa alloys hold great promise as new smart materials due to the good ductility and a wide range of martensitic transformation (MT) temperatures as well as magnetic transition points. This paper reports the results of investigations on the equilibrium phase constitution and microstructure evolution in quenched or aged CoNiGa alloys using the optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM) methods. The dendritic γ phase decreases as lowering of Ga content in studied two series of samples (Co50Ni50−xGax, x=0–50 and Co100−2yNiyGay, y=15–35). Some γ′ precipitates with different morphologies were found in given alloys conducted with water quenching (WQ) at 800°C or long-time ageing at 300°C. After 800°C quenching, the γ′ phase has a rod-like shape for the Co50Ni30Ga20 alloy but shows a Widmanstätten morphology as Ga increases to 25at%, and trends to be block structure in further high Ga content alloy. In the case of 300°C aged alloys, the γ′ particles prefer to nucleate in interior of γ phase or at the interface of β–γ. We also presented an illustrative vertical section phase diagram keeping 50at% Co, and isothermal section phase diagram at 1150 and 800°C of the CoNiGa system. Based on the schematic ternary phase diagram, the composition scope which potentially holds over the magnetic pure martensite phase structure at room temperature (RT) was pointed out. It is believed that this optimized range alloys would play an important role in the functional materials design for application.