Abstract:High-purity carbon nanotubes(CNTs)were synthesized in hydrogen ambience by CVD method by using rare earth alloy MlM5-1.35(CoAlMn)1.35 as catalyst, acetylene as carbon source. The influence of hydrogen flow rate on the diameter, shape, purity, graphitization degree and output of carbon nanotubes was systematically studied by scanning selectronic microscopy(SEM), transmission electron microscopy(TEM), X-ray diffraction(XRD)and Raman technique. The results indicate that the size of MlM alloy particles changed from μm order into nm order during the process of hydrogen reduction. While no introducing hydrogen in the reaction of acetylene and catalyst, CNTs can also be synthesized on the catalyst. The CNTs are short and thick with average diameter of about 97.8 nm, and the wall of CNTs is also thick and rough. With increasing of hydrogen flow rate, the diameter of CNTs first decrease and then increase, while the output, purity, and graphitization degree first increase and then decrease. The optimized conditions are: CNTs reach its narrowest size with diameter of 49.1 nm when hydrogen flow rate is 50 ml·min-1. The purity, graphitization degree, and output of CNTs reach highest and largest when hydrogren flow rate is 75 ml·min-1. It has the most uniform tube size of 97.38 nm when hydrogen flow rate is 100 ml·min-1.

Synthesis of Thin-walled Carbon Nanotubes

Facile synthesis of carbon nanotubes via low temperature pyrolysis of ferrocene

Synthesis of Multi-wall Carbon Nanotubes Using Fe/CNTs As Catalyst

A New Method for Synthesizing Double-Walled Carbon Nanotubes

Thin-Film Metal Catalyst For The Production Of Multi-Wall And Single-Wall Carbon Nanotubes

A one-step single source route to carbon nanotubes

Synthesis of Carbon Nanotubes Via Fe-Catalyzed Pyrolysis of Phenolic Resin

Gas-induced formation of Cu nanoparticle as catalyst for high-purity straight and helical carbon nanofibers.

Diameter-Controlled Growth of Carbon Nanotubes Through Pyrolysis of Acetylene Using Rare Earth Alloy As Catalyst in Hydrogen

Pyrolytic Synthesis of Conical Carbon Fibers with Carbon Nanotube Tips on Carbon Substrates

Controllable Synthesis of Carbon Nanotubes with Ultrafine Inner Diameters in Ethanol Flame

Synthesis Of High Quality Single-Walled Carbon Nanotubes By Cvd And Effect Of Catalyst'S Acidity-Basicity On Nanotubes Growth

Low-temperature synthesis of multi-walled carbon nanotubes over Cu catalyst

EXPERIMENTAL RESEARCH ON SYNTHESIS OF CARBON NANOTUBES

Preparation of Double-Walled Carbon Nanotubes

Effects of Catalyst Composition on the Synthesis of Single-Walled Carbon Nanotubes

(Invited) Aerosol Synthesis of Single-walled Carbon Nanotube

Controllable preparation of triple-walled carbon nanotubes and their growth mechanism.

One-step Path to Highly Crystalline Multi-Walled Carbon Nanotubes with Large Inner Diameters

Large-Scale and Selective Synthesis of Carbon Nanofiber Bundles, Curved Carbon Nanofibers and Helical Carbon Nanofibers.

Large-scale and low-cost synthesis of single-walled carbon nanotubes by the catalytic pyrolysis of hydrocarbons