Abstract:Good gas permeability is an essential factor for the smooth operation and high performance in the lower part of the blast furnace. Under the present low carbon blast furnace smelting conditions, the coke layer is thinner, and the proportion of the molten metal in the coke layer is significantly higher, resulting in a major reduction in gas permeability, which seriously affects blast furnace operations. Also, the lower thickness of the coke layer weakens the process of solid-liquid carbon dissolution when the molten iron passes through the coke layer, which reduces the carbon content of the molten iron and further deepens the erosion of the refractory by the unsaturated molten iron. The carbon dissolution in the molten iron in a blast furnace core was measured by a high-temperature vacuum wettability test tool that analyzed the interface wetting activity between Fe−C melts with specific carbon mass fraction (3.8%, 4.3%, 4.8%) and 99.9% of high temperatures graphite plates. Besides, the scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) were used to analyze the graphite substrate’s carburizing morphology and carburizing distances. The results show that, with the increase of carbon content, the interface contact angle becomes bigger. The contact angle decreases with time, and eventually reaches a steady-state during the melting process, and the Fe−C melt with saturated carbon cannot be wet. The scanning electron microscopy analysis shows that a spherical cap-like depression is created by a cross-section of the Fe−C melt and the graphite substrate, and the radius and volume of the depression decrease with increasing carbon content. The study of the EDS scanning analysis shows that the amount of dissolved carbon atoms in the graphite substrate penetrates the Fe−C melt and decreases with increasing initial carbon concentration. The smaller the carburizing effect, the better the wetting is conducive to carbon mass transfer. It is found that by measuring carburizing of the carbon atoms in the graphite substrate into the Fe−C melt by calculating the surface energy reduces the surface energy between the two. Thus, the surface tension decreases and the melt spreads slowly with contact angle gradually decreasing during melting.

Scale Accretion on Homogenization Furnace Rollers in Compact Strip Production Mills and Its Densification Mechanism

Solidification Structure of Low Carbon Steel Strips with Different Phosphorus Contents Produced by Strip Casting

Achieving Homogeneous Fe Distribution and High Strength in Cu-Fe Composite Consolidated by Powder Rolling

Interface Wetting Behavior Between Iron and Coke During the Carbon Dissolution Process in a Blast Furnace

Interfacial Phenomenon and Marangoni Convection of Fe–C Melt on Coke Substrate under in Situ Observation

Wetting and Spreading Behavior of Molten Iron in Contact with Graphite Substrate: Interfacial Effects

Isothermal Structure Transformation and Kinetics Behavior of Oxide Scale on Low Carbon Steel

Comparative Analysis of Chemical and Phase Compositions of Rolling Scale of Metallurgical Enterprises

Descaling Abilities of Two Low-Alloy High-Strength Steels Under Different Heating Processes

Relationship and Mechanism Analysis of Soft-Melt Dropping Properties and Primary-Slag Formation Behaviors of the Mixed Burden in Increasing Lump Ore Ratio

Experimental Study on Adhesion of Oxide Scale on Hot-Rolled Steel Strip

Revealing the evolution mechanism from spot segregation to banded defect above the austenitization temperature

Evolution of Temperature Field of Slabs during the Feeding Strip Process in Continuous Casting

Deposition characteristics and growth mechanism of flue gas in the treatment of zinc-containing dust by rotary hearth furnace

Characterization of Oxide Scales Formed on Plain Carbon Steels in Dry and Wet Atmospheres and Their Eutectoid Transformation from FeO in Inert Atmosphere

Mill Scale of Hot-Rolled Rebars

Coupling Simulation and Mechanism Analysis of Grain Formation and Growth in Horizontal Centrifugal Casting

The Role of Oxide-Scale Microtexture on Tribological Behaviour in the Nanoparticle Lubrication of Hot Rolling

Formation Mechanism of the Outer Layer of Duplex Scales on Stainless Steels in Oxygenated Supercritical Water

Local strain analysis of the tertiary oxide scale formed on a hot-rolled steel strip via EBSD

A Comparison of Texture Development in an Experimental and Industrial Tertiary Oxide Scale in a Hot Strip Mill