Abstract:The formation of solid calcium carbonate (CaCO3) from aqueous solutions or slurries containing calcium and carbon dioxide (CO2) is a complex process of considerable importance in the ecological, geochemical and biological areas. Moreover, the demand for powdered CaCO3 has increased considerably recently in various fields of industry. The aim of this study was therefore to synthesize fine particles of calcite with controlled morphology by hydrothermal carbonation of calcium hydroxide at high CO2 pressure (initial PCO2=55 bar) and at moderate and high temperature (30 and 90 degrees C). The morphology of precipitated particles was identified by transmission electron microscopy (TEM/EDS) and scanning electron microscopy (SEM/EDS). In addition, an X-ray diffraction analysis was performed to investigate the carbonation efficiency and purity of the solid product. Carbonation of dispersed calcium hydroxide in the presence of supercritical (PT=90 bar, T=90 degrees C) or gaseous (PT=55 bar, T=30 degrees C) CO2 led to the precipitation of sub-micrometric isolated particles (<1$\mu$m) and micrometric agglomerates (<5$\mu$m) of calcite. For this study, the carbonation efficiency (Ca(OH)2-CaCO3 conversion) was not significantly affected by PT conditions after 24 h of reaction. In contrast, the initial rate of calcium carbonate precipitation increased from 4.3 mol/h in the "90bar-90 degrees C" system to 15.9 mol/h in the "55bar-30 degrees C" system. The use of high CO2 pressure may therefore be desirable for increasing the production rate of CaCO3, carbonation efficiency and purity, to approximately 48 kg/m3h, 95% and 96.3%, respectively in this study. The dissipated heat for this exothermic reaction was estimated by calorimetry to be -32 kJ/mol in the "90bar-90 degrees C" system and -42 kJ/mol in the "55bar-30 degrees C" system.

New carbonation reactor for the preparation of sphere-like nano-calcium carbonate

Preparation of cage-like nano-CaCO3 hollow spheres for enhanced CO2 sorption

Modulation of nano CaCO3pore size and effect on properties of carbonation reaction

Preparation of Nano-CaCO3 from Phosphogypsum by Gas–Liquid–Solid Reaction for CO2 Sorption

The Crystallization Kinetic Model of Nano-Caco3 in CO2-ammonia-phosphogypsum Three-Phase Reaction System

Optimization of Calcium Carbide Residue Utilization for Producing High‐quality Calcium Carbonate

Progress on Production Technology of Nano-Calcium Carbonate in China

Synthesis of nano precipitated calcium carbonate by using a carbonation process through a closed loop reactor

Preparation of ultrafine calcium carbonate particles with micropore dispersion method

Production and Application of Needle-Like Nano-Caco3

Preparation of Super-fine Spherical CaCO3 by the Carbonation Method

Preparation of Calcium Carbonate Nanoparticles from Waste Carbide Slag Based on CO2 Mineralization

Preparation and In-Situ Surface Modification of CaCO3 Nanoparticles with Calcium Stearate in a Microreaction System

Formation of CaCO3 hollow microspheres in carbonated distiller waste from Solvay soda ash plants

Enhancement of Mixing and Mass Transfer Performance with a Microstructure Minireactor for Controllable Preparation of CaCO3 Nanoparticles

Preparation of plate-like calcium carbonate

Method for preparing nano modifier for cement-base material

Rhombohedral calcite precipitation from CO2-H2O-Ca(OH)2 slurry under supercritical and gas CO2 media

In Situ Preparation of Hydrophobic CaCO3 Nanoparticles in a Gas–liquid Microdispersion Process

Facile Preparation of Micro and Nano-Sized CaCO3 Particles by a New CO2-storage Material

Synthesis of nano-calcium carbonate from waste cement and techno-economic and environmental evaluation