Abstract:The formation of solid calcium carbonate (CaCO3) from aqueous solutions or slurries containing calcium and carbon dioxide (CO2) is a complex process of considerable importance in the ecological, geochemical and biological areas. Moreover, the demand for powdered CaCO3 has increased considerably recently in various fields of industry. The aim of this study was therefore to synthesize fine particles of calcite with controlled morphology by hydrothermal carbonation of calcium hydroxide at high CO2 pressure (initial PCO2=55 bar) and at moderate and high temperature (30 and 90 degrees C). The morphology of precipitated particles was identified by transmission electron microscopy (TEM/EDS) and scanning electron microscopy (SEM/EDS). In addition, an X-ray diffraction analysis was performed to investigate the carbonation efficiency and purity of the solid product. Carbonation of dispersed calcium hydroxide in the presence of supercritical (PT=90 bar, T=90 degrees C) or gaseous (PT=55 bar, T=30 degrees C) CO2 led to the precipitation of sub-micrometric isolated particles (<1$\mu$m) and micrometric agglomerates (<5$\mu$m) of calcite. For this study, the carbonation efficiency (Ca(OH)2-CaCO3 conversion) was not significantly affected by PT conditions after 24 h of reaction. In contrast, the initial rate of calcium carbonate precipitation increased from 4.3 mol/h in the "90bar-90 degrees C" system to 15.9 mol/h in the "55bar-30 degrees C" system. The use of high CO2 pressure may therefore be desirable for increasing the production rate of CaCO3, carbonation efficiency and purity, to approximately 48 kg/m3h, 95% and 96.3%, respectively in this study. The dissipated heat for this exothermic reaction was estimated by calorimetry to be -32 kJ/mol in the "90bar-90 degrees C" system and -42 kJ/mol in the "55bar-30 degrees C" system.

Preparation of plate-like calcium carbonate

Synthesis of Plate-Like Calcium Carbonate Via Carbonation Route

Modulation of nano CaCO3pore size and effect on properties of carbonation reaction

Preparation of Nano-CaCO3 from Phosphogypsum by Gas–Liquid–Solid Reaction for CO2 Sorption

Particle Carbonation Kinetics Models and Activation Methods under Mild Environment: the Case of Calcium Silicate

Optimization of Calcium Carbide Residue Utilization for Producing High‐quality Calcium Carbonate

Preparation of ultrafine calcium carbonate particles with micropore dispersion method

Synthesis of Dispersive CaCO3 in the Presence of MgCl2

Rhombohedral calcite precipitation from CO2-H2O-Ca(OH)2 slurry under supercritical and gas CO2 media

Synthesis of Ultrafine Calcium Carbonate with Various Shapes

Formation and Characterization of Dispersive Mg Substituted CaCO3

New carbonation reactor for the preparation of sphere-like nano-calcium carbonate

Preparation of Calcium Carbonate Nanoparticles from Waste Carbide Slag Based on CO2 Mineralization

Manufacture Process of Light Calcium Carbonate from Limestone

Influence of chemical additives on the formation of super-fine calcium carbonate

Nonclassical and Classical Crystallization: The Formation of Spindle-Shaped CaCO 3 Covered with Abundant Nanoscale Rhombic Calcite Subunits

3D Printed Gas Distributor for Enhanced Production of CaCO 3 via Bubbling Carbonation

Effect of surface water on wollastonite carbonation: Activated dissolution and mass transfer

Synthesis of nano precipitated calcium carbonate by using a carbonation process through a closed loop reactor

Preparation and In-Situ Surface Modification of CaCO3 Nanoparticles with Calcium Stearate in a Microreaction System

Study on calcium oxide pore size distribution changes during carbonation reaction for the greenhouse gas separation