Abstract:Our results show that a lower density of unreacted Mg + B material during an Mg solid-state synthesis reaction leads to a significant reduction in the quantity of the superconducting phase and lowers the homogeneity of the superconducting material. It also significantly reduces the irreversible magnetic field (Birr), critical temperature (Tc), upper magnetic field (Bc2), engineered critical current density (Jec), and n-value, despite high isostatic pressure (HIP) treatment and the use of nanoboron in the sample. Our measurements show that samples with large boron grains with an 8% higher density of unreacted Mg + B material allow better critical parameters to be achieved. Studies have shown that the density of unreacted material has little effect on Birr, Tc, Bc2, Jec, and the n-value for an Mg liquid-state synthesis reaction. The results show that the critical parameters during an Mg liquid-state synthesis reaction depend mainly on grain size. Nanoboron grains allow for the highest Birr, Tc, Bc2, Jec, and n-values. Scanning electron microscopy (SEM) images taken from the longitudinal sections of the wires show that the samples annealed under low isostatic pressure have a highly heterogeneous structure. High isostatic pressure heat treatment greatly improves the homogeneity of MgB2.

Aligned single crystal MgB<sub>2</sub> nanowires

Synthesis of Boron and Boride Compounds Nanowire Arrays by Chemical Vapor Deposition

Synthesis of optical-quality single-crystal β-BaB2O 4 microwires and nanowires

Aligned single crystal boron nanowires

Superconductivity Near 35 K in Aligned Amorphous Magnesium-Doped BMgx Nanowires

Fabrication of Superconducting Nanowires from Ultrathin MgB2 Films Via Focused Ion Beam Milling

Aligned single crystal Al-catalyzed boron nanorods on Si substrates

Synthesis of Aluminium Borate Nanowires by Sol–gel Method

Low-temperature synthesis of superconducting nanocrystalline MgB2

Amorphous B coated Mg nanopowder induces low angle grain boundaries and enhances J c of MgB 2 wire

Crystalline boron oxide nanowires on silicon substrate

Study on single crystal MgB2 nanosheets grown by hybrid physical-chemical vapor deposition

Morphology and diameter controllable synthesis of boron nanowires

Low-Temperature Synthesis of Superconducting Nanocrystalline<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:msub><mml:mtext>MgB</mml:mtext><mml:mn mathvariant="bold">2</mml:mn></mml:msub></mml:math>

MgB2 superconductor thin films on Si and Al2O3 substrates

Fabrication and Superconducting Properties of MgB2 Wires with Amorphous Carbon Doping by In-situ Powder-in-tube Method

Highly crystalline superconducting MgB2 nanowires formed by electrodeposition

Superconductivity in Dense $MgB_2$ Wires

Hybrid Physical-Chemical Vapor Deposition of Ultrathin Mgb2 Films on Mgo Substrate with High T-C and J(C)

Influence of Amorphous Boron Grain Size, High Isostatic Pressure, Annealing Temperature, and Filling Density of Unreacted Material on Structure, Critical Parameters, n-Value, and Engineering Critical Current Density in MgB2 Wires

Coating Thick MgB 2 Layer on Stainless Steel Substrate