Turbine Rotor Outlet Flow-Field Measuring with Four-Hole Pressure Probe

Bing XIONG,Hong-min CHEN,Bi WEN,Xiao-dong ZHANG

DOI: https://doi.org/10.3969/j.issn.1672-2620.2012.z1.002

2012-01-01

Abstract:A four-hole pressure probe driven by traverse control equipment was used for the measurement of the three-dimensional flow-field of the low-aspect ratio rotor outlet in an axial turbine.The four-hole pressure probe was calibrated before the tests.The data were acquired by using phase-locked technology,and the equiphase time-average method and the input-value arithmetic were employed for the data processing.As a result,flow-field parameters like Mach number,deflection angle,pitching angle,total pressure,static pressure,velocity were obtained which were obviously periodic due to the rotor.The measuring results indicate that the velocity in the leakage flow region is very low,relative total pressure is low and the loss is high.With bigger tip clearance,the leakage flow is relatively stronger,which leads to flow under-turning.The static pressure in the leakage flow is higher and the expanding degree is smaller than that in the main flow.