Abstract:Abstract Steam turbines are applied in production plants characterized by very large injections of steam. For this reason, the design and optimization of the admission are fundamentals to obtain an adequate level of turbine efficiency and ensure uniform flow at the inlet of the low pressure stages downstream the injection. In conjunction with a flexible operation and partial load conditions, it is important to estimate the losses appearing at those admissions sufficiently. The aerodynamic performance and flow field of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes were experimentally measured and numerically simulated in this paper. The total pressure loss, outlet flow angle and mass flow rate of the individual tangential admission volute at three different outlet Mach numbers and tangential admission volute coupled with the downstream vanes at four different inlet total pressures were measured. The flow field of the experimental tangential admission volute for the steam turbine was numerically investigated using threedimensional Reynolds-Averaged Navier-Stokes (RANS) and SST turbulence model. The numerical aerodynamic parameters of the tangential admission volute were in good agreement with the experimental data. The accuracy of the presented numerical method was validated. The flow field and aerodynamic parameters of tangential admission volute coupled with the downstream vanes were discussed under different inlet total pressure flow conditions. Then, three volute cases with different transverse distance were designed to investigate the influence of different outlet airflow angles on the aerodynamic performance of the downstream vanes. Results show that the outlet airflow angle of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes usually keep constants when the inlet total pressure is increases. The averaged outlet airflow angle of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes equal 152.0° and 166.6°, respectively. Comparing with the individual tangential admission volute, the outlet airflow angle of the tangential admission volute coupled with the downstream vanes is more uniform. The total pressure loss and mass flow rate of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes increase with the inlet total pressure. With the increase of the inlet total pressure, the total pressure loss coefficient of the individual tangential admission volute increases from 0.73% to 1.64%. In the same case, the total pressure loss of the tangential admission volute coupled with the downstream stator vane increases from 0.82% to 2.66%. The average airflow angle of the volute increases with the increase of the transverse distance. With the increase of the transverse distance, the total pressure loss coefficient of the volute increases and the total pressure loss coefficient of the vanes decreases. At the same time, the total pressure loss coefficient of the whole model decreases at first and then increases. The present work provides the reference for the design and performance analysis of the tangential admission volute for the steam turbines.

An Investigation of the Flow Structure in the Radial Inflow Transonic Turbine

Investigation Of The Secondary Flow Structure In The Mixed Flow Turbine For A High Pressure Ratio Turbocharger

Design and Flow Mechanism Analysis of Radial Turbine with Twin-entry Volute

Experimental And Numerical Investigation On Overall Performance Of A Radial Inflow Turbine For 100kw Microturbine

Investigation of Flow Structure in a Turbocharger Turbine under Pulsating Flow Conditions

An Investigation Of The Flow Structures And Flow Control In A Variable Geometry Turbine

Experimental and simulation study of energy loss mechanism of low pressure ratio radial turbine

Aerodynamic and Performance Behavior of A Radial Turbine at Design and Off-Design Conditions

Numerical investigation on three-dimensional complexity flows in a wheel of radial inflow turbine

Influence of Volute Cross-Sectional Shape of A Nozzleless Turbocharger Turbine under Pulsating Flow Conditions

Investigation of Transonic Flow Features in an Axial Flow Compressor Rotor

Experimental Measurements and Numerical Investigations on the Aerodynamic Performance and Internal Flow Fields of Tangential Admission Volutes for Steam Turbines

Experimental and computational investigation on flow characteristics of rotating cavities with high inlet pre-swirl axial throughflow

Radial Turbine Rotor Response to Pulsating Inlet Flows

Investigation of a Novel Turbine Housing to Produce a Non-Uniform Spanwise Flow Field at the Inlet to a Mixed Flow Turbine and Provide Variable Geometry Capabilities

Flow Structures and Heat Transfer Characteristics in a Vaneless Counter-Rotating Turbine Cavity with Different Cooling Inflows

Numerical and Experimental Investigation of Pulsating Flow Effect on A Nozzled and Nozzleless Mixed Flow Turbine for an Automotive Turbocharger

Experimental investigation of pressure losses in a co-rotating cavity with radial inflow employing tubed vortex reducers with varied nozzles

Three-dimensional Numerical Investigation of Vaneless Counter-Rotating Turbine

Study On The Steady And Unsteady Aerodynamic Performance Of A Radial Inflow Turbine With Small Partial Admission In A Miniature Orc System

Experimental And Numerical Investigation Of The Flow Field In The Radial Inlet Of A Centrifugal Compressor