Abstract:Polyacrylonitrile (PAN), PAN/cellulose acetate (CA), and PAN/CA-Ag based activated carbon nanofiber (ACNF) were prepared using electrostatic spinning and further heat treatment. Thermogravimetry-differential scanning calorimetry (TG-DSC) analysis indicated that the addition of CA or Ag did not have a significant impact on the thermal decomposition of PAN materials but the yields of fibers could be improved. Scanning electron microscopy (SEM) analysis showed that the micromorphologies of produced fibers were greatly influenced by the viscosity and conductivity of precursor solutions. Fourier transform infrared spectroscopy (FT-IR) analysis proved that a cyclized or trapezoidal structure could form and the carbon scaffold composed of C=C bonds appeared in the PAN-based ACNFs. The characteristic diffraction peaks in X-ray diffraction (XRD) spectra were the evidence of a turbostratic structure and silver existed in the PAN/CA-Ag based ACNF. Brunner-Emmett-Teller (BET) analysis showed that the doping of CA and Ag increased surface area and micropore volume of fibers; particularly, PAN/CA-Ag based ACNF exhibited the best porosity feature. Furthermore, SO 2 adsorption experiments indicated that all the three fibers had good adsorption effects on lower concentrations of SO 2 at room temperature; especially, the PAN/CA-Ag based ACNF showed the best adsorption performance, and it may be one of the most promising adsorbents used in the fields of chemical industry and environment protection.

Microstructure and chemical analysis of PAN-based activated carbon fibers prepared by different activation methods

Study on Pan-Based Activated Carbon Fiber Prepared by Different Activation Methods

Effect of Carbonization Temperature on Microstructure of PAN-based Activated Carbon Fibers Prepared by CO2 Activation

Nitrogen Adsorption Studies of PAN-Based Activated Carbon Fibers Prepared by Different Activation Methods

Study for Nitrogen Adsorption of PAN-based Activated Carbon Fibers

Surface and Porous Structure Analysis of PAN-Based Activated Carbon Fibers

Study of Microstructure of High-Surface-Area Polyacrylonitrile Activated Carbon Fibers.

Porous structure of pan-based activated carbon fibers

Surface structure of polyacrylonitrile active carbon fiber

Study On The Morphology, Structure And Mechnical Performances Of Electrospun Aligned Pan/Activated Carbon Nanofiber

Preparation of PAN-based Molecular Sieve ACF and Study of Surface Structure by XPS

Preparation and Characterization of PAN Derived Activated Carbon Nanofibers with High Specific Surface Area via Electrospinning Technique

Effect of beating degree of fiber on the development of porosity in polyacrylonitrile-based activated carbon fiber paper

Study on Pan-Based Activated Carbon Fiber Prepared by Koh Activation Method

Study on Preparation and Property of PAN-based Activated Carbon Fiber Felt

Microstructures of PAN-ACF modified by catalytic benzene deposition

Preparation of a Novel PAN/cellulose Acetate-Ag Based Activated Carbon Nanofiber and Its Adsorption Performance for Low-Concentration SO 2

Study on adsorption performance of polyacrylonitrile-based activated carbon fiber for trace of hexavalent chromium

Comparative studies of porous carbon nanofibers by various activation methods

A New Preparation Technique of Activated Carbon Fiber

Carbonization of pre-oxidized polyacrylonitrile fibers