Abstract:Direct CVD deposition of dense, continuous, and adherent diamond films on conventional Fe-based alloys has long been considered impossible. The current study demonstrates that such a deposition can be realized on Al, Cr-modified Fe-based alloy substrate (FeAl or FeCrAl). To clarify the fundamental mechanism of Al, Cr in promoting diamond growth and enhancing interfacial adhesion, fine structure and chemical analysis around the diamond film-substrate interface have been comprehensively characterized by transmission electron microscopy. An intermediate graphite layer forms on those Al-free substrates such as pure Fe and FeCr, which significantly deteriorates the interfacial adhesion of diamond. In contrast, such a graphite layer is absent on the FeAl and FeCrAl substrates, whereas a very thin Al-rich amorphous oxide sublayer is always identified between the diamond film and substrate interface. These comparative results indicate that the Al-rich interfacial oxide layer acts as an effective barrier to prevent the formation of graphite phase and consequently enhance diamond growth and adhesion. The adhesion of diamond film formed on FeCrAl is especially superior to that formed on FeAl substrate. This can be further attributed to a synergetic effect including the reduced fraction of Al and the decreased substrate thermal-expansion coefficient on FeCrAl in comparison with FeAl, and a mechanical interlocking effect due to the formation of interfacial chromium carbides. Accordingly, a mechanism model is proposed to account for the different interfacial adhesion of diamond grown on the various Fe-based substrates.

Interfacial evaluation of filtered arc-deposited amorphous diamond films on germanium

Effect of Interface Layers on Electron Field Emission Properties of Amorphous Diamond Films

Structural and optical characterizations of nanostructured diamond films grown on Si(001) substrates

Interfacial characterization of diamond thin film coated cemented carbide tool

Interfacial Modulation On Single-Crystalline Aluminum Films Grown On Gaas By Eras Insertion

Mechanical properties and Raman characterization of amorphous diamond films as a function of film thickness

Optical and Electronic-Properties of Amorphous Diamond

Effect of Interface Roughness on Field Electron Emission of Amorphous Diamond Film Emitter

Amorphous SiO2 Interlayers for Deposition of Adherent Diamond Films Onto WC–Co Inserts

Interfacial Structure Between Epitaxial Diamond Films and Silicon Substrates

Morphologies and structures of chemical vapor deposited diamond films and film-substrate interfaces

Influence of Amorphous Ceramic Interlayers on Tribological Properties of CVD Diamond Films

Direct coating adherent diamond films on Fe-based alloy substrate: the roles of Al, Cr in enhancing interfacial adhesion and promoting diamond growth

Superexcellent Infrared Protective Coatings : Amorphous Diamond Films Deposited by Filtered Cathodic Vacuum Arc Technology

SURFACE,STRUCTURE OF INTERFACE AND ADHESION OF DIAMOND FILMS DEPOSITED ON CHROMIZED LAYER OF A STEEL

The Growth And Interface Characteristics Of Diamond Films On Cemented Carbide Substrates

Improved interfacial adhesion between diamond film and copper substrate using a Cu(Cr)-diamond composite interlayer

Effects of the Surface Treatment of Silicon Substrate on the Field Emission Characteristic of A Silicon and Amorphous Diamond Cold Cathode Emitter

Spectroscopic Ellipsometry Investigations of Amorphous Diamond Films Deposited with Filtered Arc

Study on interfacial cobalt phase between diamond film and cemented carbide insert

Chemical Bonding of A-Ge1−xcx:H Films Grown by RF Reactive Sputtering