Abstract:In this study, red mud was used as the main raw material to prepare polyaluminum-ferric chloride (PCFA) with high added value. The effects of the liquid–solid ratio, reaction temperature, reaction time, hydrochloric acid concentration during acid leaching, polymerization time, OH − /Fe molar ratio, and polymerization temperature on the preparation of PCFA were investigated and determined by conducting single-factor optimization experiments under optimal preparation conditions. Characterization results show that the surface of the PCFA flocculant has compact and dense porosity and a dense sheet-like structure, and PCFA contains hydroxyl-bridged iron–aluminum polymers. When the settling time was 30 min, the stirring intensity was 200 rpm; the initial concentration of Nano-titanium dioxide(TiO 2 -NPs) was 30 mg·L −1 ; the pH value was 7.0; the dosage of PCFA was 25 mg·L −1 , and the optimum removal rates of TiO 2 -NPs and turbidity were 84.8% and 81.3%, respectively. The flocs produced by PCFA treatment of TiO 2 -NPs were large and dense. Under optimal flocculation conditions, the average particle size of PCFA-TiO 2 -NP flocs was 2.98 μm, and the fractal dimension was 1.66. Based on the abovementioned flocculation experimental data, a Grey correlation method was established to evaluate the degree of correlation among factors such as ionic strength, settling time, stirring strength, kaolin concentration, initial concentration, reaction pH value, and dosage and the performance of PCFA coagulation to remove TiO 2 -NP-containing wastewater. In the reaction system of the PCFA coagulation of TiO 2 -NPs, the dosage is the most important factor.

Preparation of polymeric aluminum ferric chloride and its application in advance treatment of coking wastewater

Preparation and Application of Slag Compound Flocculant

Humic acid removal from water with polyaluminum coagulants: Effect of sulfate on aluminum polymerization

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

High-efficiency leaching of Al and Fe from fly ash for preparation of polymeric aluminum ferric chloride sulfate coagulant for wastewater treatment

Experimental Study on Preparation of Polymeric Ferric Phosphoric Sulfate by Bio-oxidation Andfractal Characteristics of Flocs at Different Preparation Parameters

Research and Application of Gangue for the Preparation of Polymerized Aluminum Magnesium Chloride Flocculant

Coagulation Performance and Floc Characteristics of Poly-Ferric-titanium-silicate-chloride in Coking Wastewater Treatment

Preparation and coagulation-flocculation performance of covalently bound organic hybrid coagulant with excellent stability

Landfill Leachate Pretreatment by Coagulation–flocculation Process Using Iron-Based Coagulants: Optimization by Response Surface Methodology

Study on Leaching at the Early Stage of Highly Efficient Flocculants

To treat wastewater with wastes: a highly efficient flocculant from fly ash and rice straw

Electroplating Wastewater Treatment by Polyaluminum Ferric Chloride

Flocculation Performance of PCFA Composite Coagulant for Removing Nanoparticles

Study on the pretreatment of printing & dyeing wastewater with composite polyaluminum ferric flocculants

Study on Treatment of Effluent from A/O Coking Wastewater Treatment System by Ferric Sulphate Coagulant

[Changes in the intestinal activity of trypsin through bivalent cations and their determination by means of appendix coccidiosis].

Development of a Polyaluminum Ferric Titanium Chloride for Phosphorous Removal in Water

Treatment of Coking Wastewater by an Advanced Fenton Oxidation Process Using Iron Powder and Hydrogen Peroxide

Double Catholyte Electrochemical Approach for Preparing Ferrate-Aluminum: A Compound Oxidant-Coagulant for Water Purification

Study on the flocculation condition of Poly-Silicate-Aluminum-Ferric (PSiAF) coagulant prepared with coal gangue as raw material