Abstract:At Peking University (PKU), a compact 2.45 GHz microwave ion source was developed to obtain high-intensity Li+ beam. To improve the generation efficiency of Li+ ions, we developed a built-in lithium oven named surface ionization oven (SIO), which consists of a heating oven for lithium vapor production and a surface ionizer for the ionization of lithium neutrals. Consequently, the surface ionization and electron cyclotron resonance heating (ECRH) principles are combined within the compact microwave ion source. In this work, the structure and materials of the SIO are investigated systemically to lower thermal risk and increase ionization efficiency. The oven is heated by resistance heating. To minimize the heat loss, polished stainless steel shields are used to surround the oven. The surface ionizer is installed at the exit of the nozzle of the heating oven. It consists of six rhenium wires with the diameter of 0.25 mm inside the ionizer tube. Limited space near the microwave window, the dimension of SIO is ⊘ 13.5 mm × 40 mm. This source has been tested with only heating oven and SIO. With only heating oven, which means the absence of surface ionization, and a 200 eμA pulsed Li+ ion beam was stably extracted from this ion source. When the surface ionizer and the heating oven work together, a pulsed Li+ ion beam of 800 eμA is obtained, which increased by about 300%. The experiment proved that surface ionization could dramatically increase the discharge efficiency of lithium plasma in ECRIS.

Development of Mini-LIA and Primary Experiments

An introduction to Mini-LIA

Beam characterizations of the Mini-LIA

Experimental research of double-pulse linear induction electron accelerator

3.5 MeV Pulsed Power System for LIA Injector

Acceleration Modules in Linear Induction Accelerators

Development of the Lanzhou Heavy Ion Linac

Development of Single-ion Microbeam at Fudan University

Hom characteristics measurement of Mini-LIA cavity

Measurement of electron beam energy from Mini-LIA by solenoid-induced beam rotation

A Miniatured Built-in Surface Ionization Oven for the Compact Microwave Ion Source

Preliminary Design of a Hybrid Ion Source for 7li3+ Generation

Design and experiments of a compact electrostatic low energy beam transport with a double Einzel-lens for a transportable neutron source

Development of A C-Band 6 Mev Standing-Wave Linear Accelerator

Beam Transport of 3.5 MeV Foilless Injector

Progress of linear injector for ssc at hirfl

Physics and engineering design of 400 keV H- accelerator for negative ion based neutral beam injection system in China

Modified Miniature Metal Vapor Vacuum Arc Source for the Shanghai Electron Beam Ion Trap

Proton Injector Acceptance Tests for a Dielectric Wall Accelerator (dwa):Characterisation of Advanced Injection System of Light Ions (AISLI)

Conceptual design of linear injector for SSC of HIRFL

Beam optics simulation for the single-ion microbeam facility at Fudan University