Abstract:The production of the ion microbeam is traditionally by focusing or/and collimating to reduce the size of the beam to submicron meter scale. The traditional setup for the production of the microbeam consists of an expensive focusing and collimating system with a large space, based on electromagnetic fields. Meanwhile, the microbeam obtained through pure collimation by metal micro-tubes is limited by the fabrication processing, i.e., the beam spot size is very much limited by it in the scale of several microns and it is fabricated not as simple as that of a glass capillary. The use of inexpensive and easy-to-make glass capillaries as the tool for ion external microbeam production has become a new direction, inspired by early research on guiding effects. In this work, we used a glass capillary with the open outlet (108 μm in diameter), serving as a vacuum differential and collimating component, to produce a 2.5 MeV-proton microbeam directly into the atmosphere from the linear accelerator for the measurements. We measured the beam spot diameter and energy distribution of the microbeam as a function of the tilt angle of the capillary. We also conducted calculations and ion trajectory analysis on the scattering process of 2.5 MeV protons on the inner walls. The measurement results show that when the tilt angle is around 0°, there are a direct transmission part maintaining the initial incident energy, and a scattering part with the energy loss in the microbeam. It is found that the proportion of the directly transmitted protons and the beam spot size are at maximum around the tilt angle of zero. As the tilt angle increases, the beam spot diameter decreases; when the tilt angle is greater than the geometric angle, all the microbeam are from the scattering with the energy loss. The simulation combined with the ion trajectory analysis based on the scattering process explained the experimental results. It is found that the large angle scattering determines the overall external microbeam spot, while the central region of the beam spot is composed of directly penetrating ions, and its size is determined by the geometry of the glass capillary, i.e., the outlet diameter and the aspect ratio. The easy and inexpensive production of the external microbeam by glass capillaries has the nature benefits for its relative safe and stable operation, and the last but not least point is the simple positioning of the microbeam to the sample without the complex diagnostic tools. It is expected to be widely used in radiation biology, medicine, materials and other fields.

Development of Single-ion Microbeam at Fudan University

Beam optics simulation for the single-ion microbeam facility at Fudan University

Development of the Special Beam Line at HI 13 Tandem Accelerator for Irradiation of Nuclear Track Membrance

Development of the CAS-LIBB Single-Particle Microbeam for Localized Irradiation of Living Cells

Production and Measurement of MeV Proton Microbeams in Atmospheric Environment Based on Glass Capillary

Design of a Beam Line for Simultaneous Dual-Beam Ion Implantation

Achromatic Beamline Design For A Laser-Driven Proton Therapy Accelerator

Design of Beam Collection System with High Transmission Efficiency and Tunablity

A 3 MV Pelletron at Fudan University

Beam dynamic design of a high intensity injector for proton linac

Beam optical design for high energy electron radiography experiment study based on THU LINAC

Performance of the Atomic and Molecular Physics Beamline at the National Synchrotron Radiation Laboratory.

Using Tapered Glass Capillary to Focus 2 MeV He+ Ion Beam into Microbeam

The Development of an Irradiation Facility for Living Cell in Atmosphere or Solution Environments

CLAPA Proton Beam Line in Peking University

Generation of Monoenergetic Ion Beams Via Ionization Dynamics (conference Presentation)

Beam optimization of RFQ and SFRFQ combined accelerator at Peking University

Upgrade of beamline 3W1B at Beijing Synchrotron Radiation Facility

Beam power scale-up in MEMS based multi-beam ion accelerators

Development of Mini-LIA and Primary Experiments

PROGRESS IN ION BEAM ANALYSIS AT FUDAN UNIVERSITY