Abstract:The C=C double bonds in the main chain of hydroxyl-terminated polybutadiene (DHTPB), obtained by the degradation of polybutadiene rubber, were partially epoxided using m-chloroperoxybenzoic acid (mCPBA) as epoxidation reagent. A series of epoxided HTPBs (EHTPB) with different epoxy contents (5%, 10% and 15%) were prepared by tuning the molar ratio of mCPBA to C=C double bonds. The structures of EHTPBs were characterized by Fourier transform-infrared (FTIR), nuclear magnetic resonance (H-1-NMR) spectroscopy and gel permeation chromatography (GPC). The epoxy percent in EHTPBs from H-1-NMR spectra was in accordance with the design. In addition, a series of EHTPB-based polyurethane elastomers (EPU) were prepared by the reaction between EHTPB and 4,4'-diphenylmethane diisocyanate with 1,4-butanediol as a chain extender. Mechanical and thermal properties of the EPU samples were characterized by tensile test, differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). With increased epoxy percent in EHTPB, the Young's modulus and the tensile strength of the EPU samples increased, whereas the elongation at break decreased. The sample EPU10 prepared with 10% of epoxy had the best mechanical properties with 8.82 MPa as Young's modulus, 7.83 MPa as tensile strength, and (485 +/- 23)% as elongation at break. The elasticity recovery of the EPU sample was slightly better than HTPB-based PU (EPU0). The results with TGA test showed that the thermal degradation of EPU, similar to EPU0, was divided into three stages. However, the EPU samples had better thermal stability with the initial degradation temperature at 210 degrees C, about 30 degrees C higher than that of EPU0. The DSC results showed that the glass transition temperature (T-g) of EPU gradually increased as epoxy percent was increased, though still lower than that of HTPB (FHTPB) based PUs prepared by free-radical polymerization.

Improving Elongation of Epoxy Outside Protective Coating

Modification of Unsaturated Polyester Resin by HTPB: Effect of Introducing Method of the Rubber

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Research of Epoxy Resin Insulation Coating Toughening Modified with Epoxidized Hydroxyl Terminated Polybutadiene

Simultaneously Enhanced Impact Strength and Dielectric Properties of an Epoxy Resin Modified with EHTPB Liquid Rubber

Study on the Dielectric Properties of the Epoxy Resin Toughened with Different Molecular Weight HTBN

A Highly Stretchable and Self-Healing Hydroxy-Terminated Polybutadiene Elastomer

Enhanced Mechanical and Dielectric Properties of an Epoxy Resin Modified with Hydroxyl-Terminated Polybutadiene

Mechanical and dielectric properties of epoxy resin modified using reactive liquid rubber (HTPB)

The synthesis of an epoxy-terminated hyperbranched polysiloxane toughener and its application at low temperature

Dielectric properties of hydroxyl-terminated butadiene nitrile liquid rubber toughened Epoxy Resin polymer

Toughening of epoxy resin with balanced performance by in situ constructing interfacial bonding and elastic segments into epoxy network

The Study of Polyether Polyols Phosphate Toughening Epoxy Resin

Enhancing toughness, flame retardant, hydrophobic and dielectric properties of epoxy resin by incorporating multifunctional additive containing phosphorus/ silicon

Mixed Hyperbranched Poly(aryl Ether Ketone) Results in High Toughness and Excellent Thermal Resistance in Epoxy Resin

Study of Epoxy Resin Modified by Hydroxyl Terminated Polybutadiene

Isocyanate-terminated Polyethers Toughened Epoxy Resin:Chemical Modification,Thermal Properties,and Mechanical Strength

Improvement of the Electrical Resistivity of Epoxy Resin at Elevated Temperature by Adding a Positive Temperature Coefficient BaTiO3-based Compound

Morphology and Properties of Nanostructured Epoxy Blends Toughened with Epoxidized Carboxyl-Terminated Liquid Rubber

Study on High Insulation and Low Dielectric Constant Type CTPB Modified Epoxy Resin

Synthesis and Characterization of a Novel Hydroxy Telechelic Polyfluoroether to Enhance the Properties of HTPB Solid Propellant Binders