Abstract:A joint chemical reactor system referred to as an ultrasonic-intensified micro-impinging jetting reactor (UIJR), which possesses the feature of fast micro-mixing, was proposed and has been employed for rapid preparation of FePO4 particles that are amalgamated by nanoscale primary crystals. As one of the important precursors for the fabrication of lithium iron phosphate cathode, the properties of FePO4 nano particles significantly affect the performance of the lithium iron phosphate cathode. Thus, the effects of joint use of impinging stream and ultrasonic irradiation on the formation of mesoporous structure of FePO4 nano precursor particles and the electrochemical properties of amalgamated LiFePO4/C have been investigated. Additionally, the effects of the reactant concentration (C=0.5, 1.0 and 1.5molL−1), and volumetric flow rate (V=17.15, 51.44, and 85.74mLmin−1) on synthesis of FePO4·2H2O nucleus have been studied when the impinging jetting reactor (IJR) and UIJR are to operate in nonsubmerged mode. It was affirmed from the experiments that the FePO4 nano precursor particles prepared using UIJR have well-formed mesoporous structures with the primary crystal size of 44.6nm, an average pore size of 15.2nm, and a specific surface area of 134.54m2g−1 when the reactant concentration and volumetric flow rate are 1.0molL−1 and 85.74mLmin−1 respectively. The amalgamated LiFePO4/C composites can deliver good electrochemical performance with discharge capacities of 156.7mAhg−1 at 0.1C, and exhibit 138.0mAhg−1 after 100 cycles at 0.5C, which is 95.3% of the initial discharge capacity.

High performance LiFePO4/C cathode for lithium ion battery prepared under vacuum conditions

Electrochemical Properties of LiFePO4/C Cathode Materials Prepared under Vacuum Conditions

Rapid Preparation of High Electrochemical Performance LiFePO4/C Composite Cathode Material with an Ultrasonic-Intensified Micro-Impinging Jetting Reactor

Effect of vacuum assistance on the morphology and electrochemical properties of LiMn0.2Fe0.8PO4/C composites prepared by solid-phase method

Synthesis and electrochemical characterization of LiFePO4/C Cathode materials for Li-ion batteries

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery

Synthesis of LiFePO4/C Composite As a Cathode Material for Lithium-Ion Battery by a Novel Two-Step Method

Preparation and Electrochemical Performance of 2life1–xcoxpo4–li3v2(po4)3/c Cathode Material for Lithium-Ion Batteries

Synthesis and electrochemical properties of LiFePO4/C composite cathode materials

High Performance Li3V2(PO4)3/C Composite Cathode Material for Lithium Ion Batteries Studied in Pilot Scale Test

Preparation of LiFePO<sub>4</sub>/C Cathode Materials via a Green Synthesis Route for Lithium-Ion Battery Applications

Synthesis and Electrochemical Performance of LiFePO4/C Prepared by a New Method

Electrochemical Performance of LiFe1−xVxPO4/carbon Composites Prepared by Solid-State Reaction

Synthesis, characterization and properties of LiFePO4/C cathode material

Preparation of LiFePO₄/C Cathode Materials via a Green Synthesis Route for Lithium-Ion Battery Applications

LiFePO4 Cathode Materials with Enhanced Performance Prepared by a Novel Solid-State Method

Preparation of LiFePO4/C Cathode Materials via a Green Synthesis Route for Lithium-Ion Battery Applications

LiFePO4/C composites with high compaction density as cathode materials for lithium-ion batteries with high volumetric energy density

Preparation of Li3V2 (po4)3/lifepo4 Composite Cathode Material for Lithium Ion Batteries

Extra Li-ion storage of LiFePO4/C composite materials synthesized with Fe1.5P

Submicron-Sized Clusters of Lifepo4-C Nanoparticles for Lithium-Ion Battery Cathodes