Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Preparation And Properties Of Polyethylene-Clay Nanocomposites By An In Situ Graft Method

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Study on thermal stability of PP/MMT nanocomposites

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Preparation of poly(propylene)/clay layered nanocomposites by melt intercalation from pristine montmorillonite (MMT)

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Preparation of Exfoliated Polyethylene/Clay Nanocomposites at High Clay Content

Preparation and Characterization of Poly (trimethylene Terephthalate)/montmorillonite Nanocomposites

Synthesis And Properties Of Polystyrene-Clay Nanocomposites Via In Situ Intercalative Polymerization

Preparation and thermal stability of polypropylene/montmorillonite nanocomposites

Poly(butylene terephthalate)/Clay Nanocomposites directly Prepared from Pristine Montmorillonite (MMT)

Preparation of Polypropylene/montmorillonite Nanocomposites with an Exfoliated Structure by a Designed Route

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Polypropylene/montmorillonite nanocomposites I. Preparation, characterizsation and dynamic mechnical properties

Preparation and Properties of Polyethylene/Montmorillonite Composites

Preparation and Flammability Properties of Polyethylene/clay Nanocomposites by Melt Intercalation Method from Na+ Montmorillonite

Investigation Into Poly(propylene)/Montmorillonite/Calcium Carbonate Nanocomposites

Effect of compound organification of montmorillonite on the structure and properties of polypropylene/montmorillonite nanocomposites

Preparation and characterization of poly(styrene-<i>b</i>-butadiene-<i>b</i>-styrene)/montmorillonite nanocomposites

Crystallization, Morphology, and Dynamic Mechanical Properties of Poly(trimethylene Terephthalate)/clay Nanocomposites

Novel Preparation of Poly(propylene)–layered Silicate Nanocomposites