Abstract:In this study, Ho3+ and Sm3+ co-doped CeO2 (Ho0.1Sm0.1Ce0.8O2-alpha, HSDC) and HSDC-2 wt% NiO (HSDC-2NiO) were synthesized to investigate the influence of the addition of sintering additive and calcining temperature on the structures, morphologies and conductivities of the samples. The XRD patterns showed that the phase structures of 800-HSDC, 1350-HSDC, 1450-HSDC and 1450-HSDC-2NiO were all cubic fluorite CeO2 solid so-lution. The conductivities of the ceramic sheets increased significantly with the increase of the addition of NiO and sintering temperature. 1450-HSDC-2NiO had the highest conductivities of 4.6 x 10-2 S cm -1 and 7.6 x 10-2 S cm -1 at 700 degrees C and 750 degrees C, respectively. The anode-supported thin film fuel cell: NiO-HSDC | 1450-HSDC-2NiO|LSNFCN was fabricated using La0.6Sr0.3Ni0.1Fe0.8Co0.1Ni0.1O3-delta (LSNFCN) as the cathode by a slurry spin-coating method. LSNFCN exhibited a perovskite structure with a good single-phase property. The maximum output current densities (Cmax) were 663 mA cm-2 and 904 mA cm-2, and the corresponding power densities (Pmax) were 334 mW cm-2 and 431 mW cm-2 of the 1450-HSDC-2NiO membrane (15 mu m) at 650 degrees C and 700 degrees C, respectively. The durability of the thin film fuel cell at 650 degrees C showed that the OCV was relatively stable with a slight increase in Pmax and a significant increase in Cmax corresponding to a good stability within the testing range of 0-10 h. However, Pmax and Cmax were about 82% and 92% of the highest values after 40 h testing, respectively. The fuel cell performance and durability could be further improved by adding a stable barrier layer.

Impregnated La[sub 0.75]Sr[sub 0.25]Cr[sub 0.5]Fe[sub 0.5]O[sub 3−δ]-Based Anodes Operating on H[sub 2], CH[sub 4], and C[sub 2]H[sub 5]OH Fuels

Fabrication and Performance of La0.6sr0.4co0.2fe0.8o3-Delta Infiltrated-Yttria-Stabilized Zirconia Cathode on Anode-Supported Solid Oxide Fuel Cell

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

Stability of Ni-YSZ Anode for SOFCs in Methane Fuel: the Effects of Infiltrating La0.8Sr0.2FeO3-δand Gd-Doped CeO2Materials

La0.6Sr0.4Co0.2Fe0.8O3-δ Nanoparticles Modified Ni-based Anode for Direct Methane-Fueled SOFCs

A High Performance Ni-Free Redox Reversible Ceramic Anode R-La0.5Sr0.5Fe0.8Cu0.1Ti0.1O3-δ for Intermediate Temperature Solid Oxide Fuel Cells

Preparation and Performance of Tri-layer Composite Anode Supported Fuel Cell

Low Temperature Co-Sintering of Sr2Fe1.5Mo0.5O6−δ–Gd0.1Ce0.9O2−δ Anode-Supported Solid Oxide Fuel Cells with Li2O–Gd0.1Ce0.9O2−δ Electrolyte

Fabrication and Characterization of La0.6Sr0.4Co0.2Fe0.8O3-δ-Yttria Stabilized Zirconia Composites Cathode Prepared by Infiltration Method

Direct CO 2 Electrolysis on Symmetric La 0.8 Sr 0.2 Cr 0.5 Fe 0.5 O 3−δ -Zr 0.84 Y 0.16 O 2−δ Electrode-Supported Solid Oxide Electrolysis Cells

High-performance SOFCs with Impregnated Sr2Fe1.5Mo0.5O6-δ Anodes Toward Sulfur Resistance

An Anode-Supported Micro-Tubular Solid Oxide Fuel Cell with Redox Stable Composite Cathode

Structural and Electrochemical Property Evolutions of Perovskite SOFC Anodes: Role of Fuel Atmosphere in (La0.4sr0.6)1-Co0.2fe0.7nb0.1o3-δ

Enhanced Electrochemical Performance of Ba0.5Sr0.5Co0.8Fe0.2O3-δ Cathode by Zr4+, Sm3+ and Yb3+ Tri-Doped BaCeO3 Compositing for Intermediate-Temperature Thin-Film Fuel Cells

Nano La0.6Ca0.4Fe0.8Ni0.2O3−δ Decorated Porous Doped Ceria As a Novel Cobalt-Free Electrode for “symmetrical” Solid Oxide Fuel Cells

Preparation of SDC Interlayer and Influence on Performances of Anode Supported Solid Oxide Fuel Cells

La0.5Sr0.5Fe0.9Mo0.1O3-δ-CeO2 anode catalyst for Co-Producing electricity and ethylene from ethane in proton-conducting solid oxide fuel cells

Improved electrochemical oxidation kinetics of La0.5Ba0.5FeO3-δ anode for solid oxide fuel cells with fluorine doping

High-Performance Anode Material Sr2FeMo0.65Ni0.35O6−δ with In Situ Exsolved Nanoparticle Catalyst

Boosting Electrochemical Performance of Ho3+and Sm3+co-doped CeO2 Intermediate-Temperature Solid Oxide Membrane Fuel Cells by NiO

Optimization of Ni YSZ Anodes for Tubular SOFC by a Novel and Efficient Phase Inversion-Impregnation Approach