Abstract:Microencapsulations of n-octadecane with different crosslinked methylmethacrylate-based polymer as shells were carried out by suspension-like polymerizations. 1,4-butylene glycol diacrylate (BDDA), divinylbenzene (DVB), trimethylolpropanetriacrylate (TMPTA) and pentaerythritol tetraacrylate (PETRA) were employed as crosslinking agents. The influences of the type and amount of crosslinking agent, the type of initiator and polymerization temperature on the properties of as-prepared microencapsulated phase change materials (MicroPCMs) have been studied. The MicroPCMs were characterized using Fourier transformed infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). Thermal properties and thermal stability of MicroPCMs were investigated by differential scanning calorimetry (DSC) and thermalgravimetric analysis (TGA). Shell mechanical strength was measured by micro/nano-hardness tester. Thermal properties, thermal resistant temperatures as well as shell mechanical strength of MicroPCMs enhanced as the number of crosslinkable functional moieties of the crosslinking agents increased. The MicroPCMs containing 75.3wt% n-octadecane obtained using PETRA as crosslinking agent has the highest latent heats of melting (156.4J/g) and crystallization (182.8J/g) and displays the highest thermal stability and shell mechanical strength. The MicroPCMs prepared with DVB shows a relatively higher shell mechanical strength and heat capacity compared with those prepared with BDDA. Both heat capacity and thermal stability of MicroPCMs prepared by combining 2,2′-azobisisobutyronitrile (AIBN) and redox initiators at 45°C were lower than that of MicroPCMs prepared with AIBN or benzoyl peroxide (BPO) at 85°C. Hence, MicroPCMs with crosslinked methylmethacrylate-based polymer as shells, especially crosslinked polymer shells of higher crosslinking density, show a good potential as a solar-energy storage material.

Fabrication and interfacial morphologies of methanol–melamine–formaldehyde (MMF) shell microPCMs/epoxy composites

Fabrication and thermal properties of MicroPCMs: Used melamine-formaldehyde resin as shell material

Morphology, Structure and Thermal Stability of Microencapsulated Phase Change Material with Copolymer Shell

Fabrication And Properties Of Microencapsulated Phase Change Material Containing Paraffin

High compact melamine-formaldehyde microPCMs containing n -octadecane fabricated by a two-step coacervation method

Preparation and characterization of microencapsulated phase change material with low remnant formaldehyde content

Fabrication and Characterization of Microencapsulated N-Octadecane with Different Crosslinked Methylmethacrylate-Based Polymer Shells

A Smart Epoxy Composite Based on Phase Change Microcapsules: Preparation, Microstructure, Thermal and Dynamic Mechanical Performances.

Preparation and Characterization of Paraffin/Pmma Core/Shell Structured Microcapsules

Fabrication, Thermal Property and Thermal Reliability of Microencapsulated Paraffin with Ethyl Methacrylate-Based Copolymer Shell

Preparation and characterization of double-MF shell microPCMs used in building materials

Effects of interface bonding on the macro-mechanical properties of microcapsule/epoxy resin composites

Preparation and Characterization of Novel MicroPCMs (microencapsulated Phase-Change Materials) with Hybrid Shells Via the Polymerization of Two Alkoxy Silanes

Fabrication and Performance of Composite Microencapsulated Phase Change Materials with Palmitic Acid Ethyl Ester as Core

Experimental study on a functional microencapsulated phase change material for thermal management

Fabrication and evaluating thermophysical properties of microencapsulated organic and eutectic phase change material

Preparation and characterisation of double-shell n-octadecane phase change material encapsulation

Efficient Preparation and Characterization of Paraffin‐based Microcapsules by Emulsion Polymerization

Preparation and Characterization of Poly(methyl Methacrylate-Co-divinylbenzene) Microcapsules Containing Phase Change Temperature Adjustable Binary Core Materials

Preparation and characterization of acrylic resin encapsulated n-dodecanol microcapsule phase change material

Optimization of parameters in preparation of PCM microcapsules based on melamine formaldehyde through dispersion polymerization