Abstract:Two potential phase change materials (PCMs) were microencapsulated by complex coacervation with gelatin-gum arabic and the characteristics of these microparticles were investigated. Methyl-palmitate and paraffin wax were used as core material, since they provide two different melting points (around to 30 °C and 50 °C, respectively). The protective barrier provided by microencapsulation prevents the material from sticking on and spreading out the surrounding material during the phase change. These systems can be applied in solar systems or building materials and textiles, for heat storage and release. Some operational variables were investigated to select suitable production conditions for paraffin wax: temperature, surfactant addition, time of addition and amount of core material. The encapsulation ratio (ER%) of these systems was indirectly determined by differential scanning calorimetry (DSC). As results, an increased core to coating ratio from 50 to 75% and the ER raised from 25% to 50%. The paraffin influenced the complexation of the polymers and with the largest amount of this hydrocarbon, about 39% of the polymer was not complexed. The use of methyl palmitate did not have this influence on the coacervation process. Energy storage capacities of 58.49 J g–1 and 107 J g–1were observed, respectively, for paraffin wax and methyl palmitate systems, indicating the potentiality of both for use as energy storage systems. The melting point of microcapsules produced with paraffin was 46 °C, and with methyl palmitate was 28 °C, both near of the melting point of the pure compounds. The average particle size of the paraffin and methyl palmitate microcapsules obtained was 69.43 μm and 111.55 μm, respectively.

Fabrication And Properties Of Microencapsulated Phase Change Material Containing Paraffin

Preparation and Characterization of Poly (Mma-Co-aa)/paraffin Microencapsulated Phase Change Material for Thermal Energy Storage

Preparation and Properties of Thermal Energy Storage and Temperature Regulation Microcapsulated Paraffin by P(MMA-co-AA)

FABRICATION AND PROPERTIES OF MICROENCAPSULATED PHASE CHANGE MATERIAL CONTAINING PARAFFIN BY USING DIFFERENT TYPES OF SMA AS EMULSIFIER

Encapsulation of Phase Change Materials Via Interfacial Miniemulsion Polymerization for High Thermal Energy Storage Density

Fabrication, Thermal Property and Thermal Reliability of Microencapsulated Paraffin with Ethyl Methacrylate-Based Copolymer Shell

Preparation and Characterization of Paraffin/Pmma Core/Shell Structured Microcapsules

Preparation and characterization of microencapsulated phase change material with low remnant formaldehyde content

Synthesis and Thermal Performance of Polyurea Microcapsulated Phase Change Materials by Interfacial Polymerization

Preparation and Thermal Reliabilities of Microencapsulated Phase Change Materials with Binary Cores and Acrylate-Based Polymer Shells

Studies on Nanosilica Modified Paraffin Microcapsule Phase Change Energy Storage Materials

Morphology, Structure and Thermal Stability of Microencapsulated Phase Change Material with Copolymer Shell

Fabrication and thermal properties of MicroPCMs: Used melamine-formaldehyde resin as shell material

Fabrication and Performance of Composite Microencapsulated Phase Change Materials with Palmitic Acid Ethyl Ester as Core

Preparation and Thermal Properties of Microencapsulated Paraffin with Polyurea/acrylic Resin Hybrid Shells As Phase Change Energy Storage Materials

Preparation and Properties of Microencapsulated Phase Change Materials Containing Two-Phase Core Materials

Synthesis and characterization of phase change materials microcapsules with paraffin core/cross-linked hybrid polymer shell for thermal energy storage

Synthesis, Characterization and Thermal Properties of Coconut Oil/Melamine Formaldehyde Core/Shell Microencapsulated Phase Change Materials Fabricated Using In-Situ Polymerization Method

Investigation of Phase Change Material Encapsulation by Complex Coacervation

Microencapsulated Phase Change Materials and Its Application in Thermal-Regulated Fibers

Preparation and characterization of microencapsulated n -octadecane as phase change material with different n -butyl methacrylate-based copolymer shells