Abstract:Microencapsulations of n-octadecane with different crosslinked methylmethacrylate-based polymer as shells were carried out by suspension-like polymerizations. 1,4-butylene glycol diacrylate (BDDA), divinylbenzene (DVB), trimethylolpropanetriacrylate (TMPTA) and pentaerythritol tetraacrylate (PETRA) were employed as crosslinking agents. The influences of the type and amount of crosslinking agent, the type of initiator and polymerization temperature on the properties of as-prepared microencapsulated phase change materials (MicroPCMs) have been studied. The MicroPCMs were characterized using Fourier transformed infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). Thermal properties and thermal stability of MicroPCMs were investigated by differential scanning calorimetry (DSC) and thermalgravimetric analysis (TGA). Shell mechanical strength was measured by micro/nano-hardness tester. Thermal properties, thermal resistant temperatures as well as shell mechanical strength of MicroPCMs enhanced as the number of crosslinkable functional moieties of the crosslinking agents increased. The MicroPCMs containing 75.3wt% n-octadecane obtained using PETRA as crosslinking agent has the highest latent heats of melting (156.4J/g) and crystallization (182.8J/g) and displays the highest thermal stability and shell mechanical strength. The MicroPCMs prepared with DVB shows a relatively higher shell mechanical strength and heat capacity compared with those prepared with BDDA. Both heat capacity and thermal stability of MicroPCMs prepared by combining 2,2′-azobisisobutyronitrile (AIBN) and redox initiators at 45°C were lower than that of MicroPCMs prepared with AIBN or benzoyl peroxide (BPO) at 85°C. Hence, MicroPCMs with crosslinked methylmethacrylate-based polymer as shells, especially crosslinked polymer shells of higher crosslinking density, show a good potential as a solar-energy storage material.

Preparation and Characterization of Poly(methyl Methacrylate-Co-divinylbenzene) Microcapsules Containing Phase Change Temperature Adjustable Binary Core Materials

Preparation and Characterization of Poly (Mma-Co-aa)/paraffin Microencapsulated Phase Change Material for Thermal Energy Storage

Preparation and Thermal Reliabilities of Microencapsulated Phase Change Materials with Binary Cores and Acrylate-Based Polymer Shells

Preparation and Properties of Thermal Energy Storage and Temperature Regulation Microcapsulated Paraffin by P(MMA-co-AA)

Adjusting phase change temperature of microcapsules by regulating their core compositions

Synthesis and thermal properties of acrylate-based polymer shell microcapsules with binary core as phase change materials

Encapsulation of Phase Change Materials Via Interfacial Miniemulsion Polymerization for High Thermal Energy Storage Density

Morphology, Structure and Thermal Stability of Microencapsulated Phase Change Material with Copolymer Shell

Preparation and characterization of microencapsulated n -octadecane as phase change material with different n -butyl methacrylate-based copolymer shells

Preparation, Thermal Properties and Thermal Reliabilities of Microencapsulated N-Octadecane with Acrylic-Based Polymer Shells for Thermal Energy Storage

The Effect of Different Soft Segments on the Formation and Properties of Binary Core Microencapsulated Phase Change Materials with Polyurea/polyurethane Double Shell.

Microencapsulated N-Octadecane with Different Methylmethacrylate-Based Copolymer Shells As Phase Change Materials for Thermal Energy Storage

Preparation and characterization of acrylic resin encapsulated n-dodecanol microcapsule phase change material

Synthesis and characterization of phase change materials microcapsules with paraffin core/cross-linked hybrid polymer shell for thermal energy storage

Preparation and Characterization of Novel MicroPCMs (microencapsulated Phase-Change Materials) with Hybrid Shells Via the Polymerization of Two Alkoxy Silanes

Microencapsulated Comb-Like Polymeric Solid-Solid Phase Change Materials via In-Situ Polymerization

Experimental study on a functional microencapsulated phase change material for thermal management

Preparation, Thermal Property, and Thermal Stability of Microencapsulated N -Octadecane with Poly(stearyl Methacrylate) As Shell

Preparation and properties of microencapsulated n-octadecane with acrylic-based polymer as phase change materials

Microcapsules composed of stearic acid core and polyethylene glycol‐based shell as a microcapsule phase change material

Fabrication and Characterization of Microencapsulated N-Octadecane with Different Crosslinked Methylmethacrylate-Based Polymer Shells