Abstract:Microencapsulations of n-octadecane with different crosslinked methylmethacrylate-based polymer as shells were carried out by suspension-like polymerizations. 1,4-butylene glycol diacrylate (BDDA), divinylbenzene (DVB), trimethylolpropanetriacrylate (TMPTA) and pentaerythritol tetraacrylate (PETRA) were employed as crosslinking agents. The influences of the type and amount of crosslinking agent, the type of initiator and polymerization temperature on the properties of as-prepared microencapsulated phase change materials (MicroPCMs) have been studied. The MicroPCMs were characterized using Fourier transformed infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). Thermal properties and thermal stability of MicroPCMs were investigated by differential scanning calorimetry (DSC) and thermalgravimetric analysis (TGA). Shell mechanical strength was measured by micro/nano-hardness tester. Thermal properties, thermal resistant temperatures as well as shell mechanical strength of MicroPCMs enhanced as the number of crosslinkable functional moieties of the crosslinking agents increased. The MicroPCMs containing 75.3wt% n-octadecane obtained using PETRA as crosslinking agent has the highest latent heats of melting (156.4J/g) and crystallization (182.8J/g) and displays the highest thermal stability and shell mechanical strength. The MicroPCMs prepared with DVB shows a relatively higher shell mechanical strength and heat capacity compared with those prepared with BDDA. Both heat capacity and thermal stability of MicroPCMs prepared by combining 2,2′-azobisisobutyronitrile (AIBN) and redox initiators at 45°C were lower than that of MicroPCMs prepared with AIBN or benzoyl peroxide (BPO) at 85°C. Hence, MicroPCMs with crosslinked methylmethacrylate-based polymer as shells, especially crosslinked polymer shells of higher crosslinking density, show a good potential as a solar-energy storage material.

Preparation and Characterization of Novel MicroPCMs (microencapsulated Phase-Change Materials) with Hybrid Shells Via the Polymerization of Two Alkoxy Silanes

Morphology, Structure and Thermal Stability of Microencapsulated Phase Change Material with Copolymer Shell

Preparation and properties of microencapsulated n-octadecane with acrylic-based polymer as phase change materials

Preparation and characterization of acrylic resin encapsulated n-dodecanol microcapsule phase change material

Preparation and Thermal Reliabilities of Microencapsulated Phase Change Materials with Binary Cores and Acrylate-Based Polymer Shells

High compact melamine-formaldehyde microPCMs containing n -octadecane fabricated by a two-step coacervation method

Preparation and Properties of Microencapsulated Phase Change Materials Containing Two-Phase Core Materials

Fabrication and Characterization of Microencapsulated N-Octadecane with Different Crosslinked Methylmethacrylate-Based Polymer Shells

Preparation, Characterization, and Thermal Properties of Micropcms Containing N -Dodecanol by Using Different Types of Styrene-Maleic Anhydride As Emulsifier

Preparation and characterization of microencapsulated phase change material with low remnant formaldehyde content

Pickering Emulsion: A Novel Template for Microencapsulated Phase Change Materials with Polymer–silica Hybrid Shell

Preparation and Characterization of PMMA/TiO2 Hybrid Shell Microencapsulated PCMs for Thermal Energy Storage

Preparation of High Thermo-Stability and Compactness Microencapsulated Phase Change Materials with Polyurea/Polyurethane/Polyamine Three-Composition Shells through Interfacial Polymerization

Microencapsulation of Phase Change Materials with Carbon Nanotubes Reinforced Shell for Enhancement of Thermal Conductivity

Synthesis and Characterization of Mixed Alkanes Microcapsules with Phase Change Temperature below Ice Point for Cryogenic Thermal Energy Storage

Preparation and Thermal Performances of Microencapsulated Phase Change Materials with a Nano-Al2o3-doped Shell

Preparation and Characterization of Poly(methyl Methacrylate-Co-divinylbenzene) Microcapsules Containing Phase Change Temperature Adjustable Binary Core Materials

Facile and low energy consumption synthesis of microencapsulated phase change materials with hybrid shell for thermal energy storage

Microencapsulated N-Octadecane with Different Methylmethacrylate-Based Copolymer Shells As Phase Change Materials for Thermal Energy Storage

Fabrication And Properties Of Microencapsulated Phase Change Material Containing Paraffin

Preparation, morphology and thermal properties of microencapsulated palmitic acid phase change material with polyaniline shells