Abstract:Microencapsulations of n-octadecane with different crosslinked methylmethacrylate-based polymer as shells were carried out by suspension-like polymerizations. 1,4-butylene glycol diacrylate (BDDA), divinylbenzene (DVB), trimethylolpropanetriacrylate (TMPTA) and pentaerythritol tetraacrylate (PETRA) were employed as crosslinking agents. The influences of the type and amount of crosslinking agent, the type of initiator and polymerization temperature on the properties of as-prepared microencapsulated phase change materials (MicroPCMs) have been studied. The MicroPCMs were characterized using Fourier transformed infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). Thermal properties and thermal stability of MicroPCMs were investigated by differential scanning calorimetry (DSC) and thermalgravimetric analysis (TGA). Shell mechanical strength was measured by micro/nano-hardness tester. Thermal properties, thermal resistant temperatures as well as shell mechanical strength of MicroPCMs enhanced as the number of crosslinkable functional moieties of the crosslinking agents increased. The MicroPCMs containing 75.3wt% n-octadecane obtained using PETRA as crosslinking agent has the highest latent heats of melting (156.4J/g) and crystallization (182.8J/g) and displays the highest thermal stability and shell mechanical strength. The MicroPCMs prepared with DVB shows a relatively higher shell mechanical strength and heat capacity compared with those prepared with BDDA. Both heat capacity and thermal stability of MicroPCMs prepared by combining 2,2′-azobisisobutyronitrile (AIBN) and redox initiators at 45°C were lower than that of MicroPCMs prepared with AIBN or benzoyl peroxide (BPO) at 85°C. Hence, MicroPCMs with crosslinked methylmethacrylate-based polymer as shells, especially crosslinked polymer shells of higher crosslinking density, show a good potential as a solar-energy storage material.

Fabrication and characterization of micro-encapsulated sodium phosphate dodecahydrate with different crosslinked polymer shells

Preparation and Characterization of Poly (Mma-Co-aa)/paraffin Microencapsulated Phase Change Material for Thermal Energy Storage

Encapsulation of Phase Change Materials Via Interfacial Miniemulsion Polymerization for High Thermal Energy Storage Density

Research on the modification of microencapsulated phase change material for thermal energy storage by nano-SiO2 and graphite

Thermophysical Properties of a Novel Nanoencapsulated Phase Change Material

Fabrication and Characterization of Microencapsulated N-Octadecane with Different Crosslinked Methylmethacrylate-Based Polymer Shells

Preparation and Properties of Thermal Energy Storage and Temperature Regulation Microcapsulated Paraffin by P(MMA-co-AA)

Preparation, Thermal Properties and Thermal Reliabilities of Microencapsulated N-Octadecane with Acrylic-Based Polymer Shells for Thermal Energy Storage

Preparation and characterization of microencapsulated n -octadecane as phase change material with different n -butyl methacrylate-based copolymer shells

Morphology, Structure and Thermal Stability of Microencapsulated Phase Change Material with Copolymer Shell

Microencapsulated N-Octadecane with Different Methylmethacrylate-Based Copolymer Shells As Phase Change Materials for Thermal Energy Storage

Experimental study on a functional microencapsulated phase change material for thermal management

Preparation and characterization of acrylic resin encapsulated n-dodecanol microcapsule phase change material

Preparation and properties of microencapsulated n-octadecane with acrylic-based polymer as phase change materials

Preparation and Characterization of Novel MicroPCMs (microencapsulated Phase-Change Materials) with Hybrid Shells Via the Polymerization of Two Alkoxy Silanes

Synthesis and Thermal Performance of Polyurea Microcapsulated Phase Change Materials by Interfacial Polymerization

Preparation, Thermal Property, and Thermal Stability of Microencapsulated N -Octadecane with Poly(stearyl Methacrylate) As Shell

Optimized emulsifier combination based microencapsulated phase change materials (MicroPCMs): Preparation, characterization, and applications

Fabrication and Performance of Composite Microencapsulated Phase Change Materials with Palmitic Acid Ethyl Ester as Core

Fabrication, Thermal Property and Thermal Reliability of Microencapsulated Paraffin with Ethyl Methacrylate-Based Copolymer Shell

Preparation of High Thermo-Stability and Compactness Microencapsulated Phase Change Materials with Polyurea/Polyurethane/Polyamine Three-Composition Shells through Interfacial Polymerization