Abstract:Quartz Crystal Microbalance with Dissipation monitoring (QCM-D) has become a major tool in the analysis of adsorption of nanometric objects, such as proteins, viruses, liposomes and inorganic particles from the solution. While in vacuum extremely accurate mass measurements are possible, in a liquid phase the quantitative analysis is intricate due to the complex interplay of hydrodynamic and adhesion forces, varying with the physicochemical properties of adsorbent and the quartz resonator surfaces. In the present paper we dissect the role of hydrodynamics for the analytically tractable scenario of a stiff contact, whereas the adsorbed particles oscillate with the resonator as a whole without rotation. Under the assumption of the low surface coverage, we theoretically study the excess shear force exerted on the resonator due to presence of a single adsorbed particle. The excess shear force has two contributions: (i) the fluid-mediated force due to flow disturbance created by the particle and (ii) the viscous force exerted on the particle by the fluid and transmitted to the resonator via contact. We found that for small adsorbates, there is mutual cancellation of the above contributions to the excess shear force at the leading order approximation, reducing the overall effect of the hydrodynamics to the order-of-magnitude of the inertial force. However, accurate numerical solution shows that for small particles the viscous force dominates over the inertia force, rendering the standard Sauerbrey model inapplicable. These findings indicate that the accurate account of hydrodynamics in the analysis of QCM-D response is critical. The resulting dimensionless frequency and dissipation shifts and the corresponding acoustic ratio computed numerically, showing a fair agreement with previously published experimental results at low oscillation frequencies.

A new approach to the development of quartz crystal sensors distinguishing between mass loading and liquid damping.

Study on the characteristic damping of the thickness shearing quartz crystal sensors in liquids

Study on the principle of dual modulation of quartz crystal sensors under liquid phase

Experimental verification of the characteristic damping theory of the quartz crystal sensors

A Contactless Conductivity Sensor Based on Capacitively Coupled Principle

Investigation of a Complete Squeeze-Film Damping Model for MEMS Devices

Convergence of Dissipation and Impedance Analysis of Quartz Crystal Microbalance Studies

A wireless-electrodeless quartz crystal microbalance with dissipation DMMP sensor

Contributions of amplitude measurement in QCM sensors

Study on Behaviour of Qcm Sensor in Loading Variation

Quartz crystal microbalance based on torsional piezoelectric resonators.

Analysis on the acoustic-load sensitivity of quartz crystal resonator

Development of Quartz-Resonance Absolute Pressure Sensor

Quartz Crystal Microbalance frequency response to discrete adsorbates in liquids

Progresses on the Theory and Application of Quartz Crystal Microbalance

Thickness shear mode quartz crystal resonators with optimized elliptical electrodes

Measurements of interfacial viscoelasticity with a quartz crystal microbalance: influence of acoustic scattering from a small crystal-sample contact.

Development of a Flow Injection Based High Frequency Dual Channel Quartz Crystal Microbalance

Study Of Sensing Theory By Resonant Damping

Determination Of Liquid Density With A Low Frequency Mechanical Sensor Based On Quartz Tuning Fork

A Mass Sensing Technology Based on a Dynamic Microcantilever in Liquid